MikroTik - Search

Jorge

@ laservideo Hi, a bit late I guess... I have exactly the same problem with a RBGrooveA-52HPn. Once I disconnect, I loose the connection. As you do, I connect my macbook pro to get it work again. But there is a little prog that permit you to use Mac OSX without bootcamp, maybe wine? Anyhow you can o...

Jorge

谢谢帕梅拉。我明天试试。年代以来cript I posted was written, I upgraded to the last version, I do that all the time, just in case there would be a bug, bigger than me... I let you know after it's done. Good evening. Jorge PS: I tried this setup, this morning, and could't have the wi...

Jorge

Thanks for the reply, Pamela. Well, I will try to fo configure that. I am starting to scrach my head, wich is a bad sign. It means that I don't know how and where to start. Of course I have enough electricity supply onbord, with the sun(my cat has a single outbord engine, so no charge to expect from...

Jorge

你好,帕梅拉。这是配置之一 : ----------------------------------------------------------------- # aug/12/2017 16:19:04 by RouterOS 6.39.2 # software id = 26IM-08GW # /interface bridge add name=bridge1 /interface wireless security-profiles set [ find default=yes ] authentication-types=wpa-...

Jorge

A precision: the router (airport) doesn't connect to the access point. It's the groove that gives access to the router or to the inboard computers. I do have internet access without the airport, as long as there is someone (the access point)at the other end. If the signal cuts from the land, or if I...

Jorge

Thanks for the answer Pamela. You helped me a lot when I was starting to set up that device. It's level 4 licence. Sorry for the delay, I am at sea sometimes... The setup, as shown on the quickset page is in router mode. I don't know if I express myself correctly: it works, perfectly but when there ...

Jorge

Hello everybody. I am newbie and a Frenchee so I'm askink you to be patient... Here is my little problem: when I am connected to an access point, from my boat, everything works ok, depending of the signal that I receive. The problem arises when there is no signal from the land, since there are many ...

Jorge

Thanks again Msatter
to understand these matters I would need to go back to school. But they do not want old folks...
To find somewone that spends so much time to help a unknown person was a blessing.

Jorge

Thank you, we have tried so many settings, I can't beleive it is such a nasty thing to configurate..
I'll read that too, and let you know(I am in Caribbean, so the answers might be with another timing)

Jorge

Mistake, sorry I don't know how to remove the post

Jorge

to get access to the network of captain yes

Jorge

它必须被连接在热点我猜,这s done...

Jorge

Thanks, good night.

Jorge

Here they are, to be patient, as you are, to care for someone else... 100.70 (2 last) About the access point, my reborn airport does it. Everything on my boat run on batteries. I bought that groove just because it runs on 0,5 amps And permit access to 5ghz and 2,4 ghz, the frequencies of almost ever...

Jorge

No, this doesn't work. Sometimes the network appears with a message saying that it is not secure. Then I check the security tab. Sometimes the secutity settings has been taken off, I put it back. Then the whole router freezes, i have to reset it. When I start it, and in the first page, the open term...

Jorge

Here it is: _____________________________________________________________________________________________________________________ # aug/08/2017 12:14:55 by RouterOS 6.39.2 # software id = 26IM-08GW # /interface wireless set [ find default-name=wlan1 ] antenna-gain=3 band=5ghz-a/n/ac \ channel-width=...

Jorge

I just finished to fix the airport 20 mn ago, a loose welding in the alim...I will try to finish the settings of the groove(wireless) before the airport finishes it's life... I already made an export of the settings. How can I open this file to hide sensitive matters? Then I will send it to the thre...

Jorge

I tried both. The wiki said(somewhere) to make a new profile, so did I. I am missing some informations to understand how it works, since everything is written in English, and that I don't know yet the signification() of all the technical terms. First: the Groove "sees"wirelessly the hotspo...

Jorge

Hello Msatter No, unfortunatly, I don't have your email, so everybody is condemned to read my saga, and my french accent:) Thanks Bartoszp, I'try that in five minutes and let you know... By now I had to remove the bridge, since my settings made an open hotspot available to everybody. So I have a&quo...

Jorge

Hello there Back on the track. I received the replacement unit, that works ok on ethernet. I tried again and again to enter the settings that we discussed before with the resulting consequencys() 1/the wifi is not secure and is likely to be "open" even with the setting we discussed before ...

Jorge

Hi Msatter
I should receive the replacement groove next week. I hope I won't start a new "saga"
They could have exchanged it for a bullet, but these are setup to work for 5ghz or 2.4ghz. You must own 2 of them to cover both ranges.
I still don't have access to your mail...

Jorge

Hi there, The antenna is always the "maillon faible" in systems with crowded surroundings. But the groove could handle that easily. I have to optimize as much as I can, and the first step is a Lan(RJ45) cable for powering the device, setup etc. And the second point, that is the first in fa...

Jorge

Thanks to answer. I mailed the people in Lituania that sold me that piece, they are going to give me my money back or another device. I prefer a device. Money won't give me connection. About mast and wind: an omnidirectional antenna is the only way. A boat swings around his anchor, in my case 50 met...

Jorge

Merci, It was on top of the mast, but it's not the best place, not only for the reset. In fact we are seldom at sight of a hotspot because the other boat's masts that are in the way, and a boat is always swinging from one side to the other. I need the "tube" system, to shorten the distance...

Jorge

Thanks to come back. Well, this is indeed a strange object. Since it's brand new(I bought it in Estonia trough the net) it should be clean. But living in a wet surrounding, I often have to dobble check everything, moist, fungus, etc. It made me a bit nervous. As a sailor I'm used to have things that...

Jorge

Hi M. M. Since the last post, something new. It was quasi impossible to connect in Wi-fi. The groove didn't want to keep the password and the security config always finished blanc: none. I became a bit pissed of, since most of the time I would loose the hand with the computer so I had to climb to th...

Jorge

Also, something interesting, at list for me: I setup a hotspot I want to use with the groove. From the mac, whith the cable, I can access the winbox settings. If I want to do the same in wi-fi with an Ipad, the password I have to enter is the one of the hotspot, not the management one... There is a ...

Jorge

Hello, I was not aware of your answer. Thanks a lot for everything. It was not an easy task. You have been so patient and you explained everything such a way that I (almost) understand the way it works. I tried to send you a private message but it doesn't work pushing "contact" English is ...

Jorge

Hi With a teacher like you, happened what should have happened: IT WORKS!!! I mean everything works. Now I would like to export this config in a form usable for others in the same sh... Thank you so much. It seems nothing, but I manage all administration papers, social security etc. From the interne...

Jorge

Security profile in default To set it I go to: Wireless/security profile/ I guess there is a bug in the way I set up the config, thus it is coming back every time I give it the saved RSC Since it works perfectly(wired) whith my phone as a Hotspot(it doesn't cost much just to type as I do now) I can ...

Jorge

Well, I did that last night. I do it now: response-- WPA pre-shared key needs to be 8 to 64 characters.

So I configured the security profile with wpa Key and tryed again. Response: Failure: already have interface with such name

Jorge

Hello there, Back on the track. I just did: (to start with a new setup) 1 Reset 2 copy/paste the config From Pamela32 3 choose my phone as a hotspot, input the password, connect to e web page. Up to here it works, wired. In that config, the router doesn't appears in any wifi. I just need to learn, l...

Jorge

Hello, I forgote we changent the thread. Now, it works ok, up to the security problem, not resolved yet. I can't have tne network secured. If I do so, I cant acces it with the password, on the same computer that created it. I could yesterday, acces it with only one tablet, the other devices were rej...

Jorge

Almost evrything works. I can't really secure the network: it refuses the passcode I enter when i try to rech it from another device.
So I tried to remove the security profile: not allowed
I made a new one and set it as the one to use, same thing...
Tomorrow.

Jorge

Thanks, I had some mails with Nicolas, telling him how lucky one is to find an helpfull hand across the planet. Now, I have to finish the setup. I went ashore to buy some food(since a week I was plugged to the net). When I came back I connected the groove: it did'nt work. It does'nt matter since I k...

Jorge

Thanks, I am now a specialist, haha
It works.
So, I'll try to write down a recapitulation of that odysea, and keep it in case someone needs a specialist.
Thanks for your time.
Do you ever come to Caribbean?
Cheers

Jorge

Hi, here it is:viewtopic.php?f=7&t=122923

Jorge

Hello there Ok for that. I made the all thing working, except that I can't secure the wifi I do the wole process, wpa2 etc, imput a password, everything is accepted, but when I try to open a connection whith ipad it says that it's an open network. And it's really long to appear as a network on the m...

Jorge

No, I cannot paste that .rsc format in my Terminal, It's like Greek for it...

Jorge

Haha!!
If you send me your mail I drop you pictures of the place where i'm writing you from. You will see, that even here computers bothers.
Cheers

Jorge

Thanks,
Yes you better sign off if you don't wan't to divorce.
We "Talk" later, tomorow if you wish.
Take care.
Thanks again
Jorge

Jorge

No, I can't. I can only set the master interface to Wlan1
Maybe could I restore the previous backup since I can't remove the security profile?

Jorge

Sorry, I was trying to have it work.
Wireless it doest want my passwrd, and doesn't let me change the security profile
In wlan2 security profile is in default
Is it normal, in wlan2 to see master interface: wlan1?

Jorge

WPA2 security profile: default

Jorge

I have set the password and in fact, I can't acces the network from my tablet or my mac in Wifi, the password isn't reconized.

Jorge

Oups, it works, but the password is the one used to the hotspot, that gave me Nicolas, the same for everybody to get to the login page, an easy one.

Jorge

yes it works, I went up to the paypal page.
But I do not see My wifi
From my ipad I can see captain jorge, but it asks me for a password, that I didn't input...

Jorge

Thanks. So I did all that and I am ready to fight, as long as it's a small and old oponent. I did that before asking you, you told me last time, but it was alredy in none mode. I also had pasta, but with atun. It still works in lan, I can't dig it! Just missing the wi-fi and I will be abble to have ...

Jorge

Thanks, good diner?
Here: I upgraded the os to the last version, ok
Then, copy/paste, ok
I can connect a network and go to the welcome page, ok
I did all your manipulations up to the end.
I finish with that message:" DHCP server can not run on slave interface"
Here we are.

Jorge

Good, don't eat to much, you will get sleepy

I will have my lunch now.
More later

Jorge

Yes I do...

Now, if I try to change one thing, by example switching to 5ghz, it disables the whole thing.
No way to go back to the original setup: so reset, copy/paste...
Très instable...

Jorge

Something new, it works, connected withe the cable.
So I don't connect yet until I get to connect in wi-fi

Jorge

I went back to a clean install, copy/paste.
I can connect to a spot, up to the connection pab-ge. It seems that we are getting close...
I tried to connect one of the Captain wifi, witch has no password, It disabled the whole thing, no more scan, etc.
No way to come back. So reset, copy/paste

Jorge

When I double click: nothing. If selected, down below it's a window to enter the password. By the way. I see my phone connection with the other. Once selected, password, it works, but slower. To do that I had to setup the ethernet in DHCP. But now, no more networks appears, reboot, and nothing... I ...

Jorge

I see 22 networks.
Captain wifi is one(several) of them.

Jorge

Ok reset done, copy/paste, but I still do not understand how to connect to that captain'page without a password
If I open firefox, I type Captain Wifi Secure, and, since I'm not connected to the net....adresse introuvable...

Jorge

Ok

Jorge

And then, trying to plug in the groove back for additional setup(mess up) it doesn't accept to open winbox.
So I unplug, erase with the button and back to the war...

Jorge

Hi Mslatter I tried to give the groove the settings up to captainjorge(i gave another name) this appears in wifi, oce deconnected from the lan. I checked in the list of ap Captainwifi. I input a fake (I do not have the right one...) Then when I tried to reach "my" Captain jorge that shows ...

Jorge

Ok, I did it. Now that's a new context. Many more networks appears in the window(all protected) Where should I start with this new setting, since my groove doesn't appears more in the wifi of my mac. If by example I choose my phone as an ap, it asks me for a password, ok, then if I disconnect from t...

Jorge

And Jorge do now have CaptianWifi? If so then we have to enable security on CaptianJorge WiFi because else the ships around you going to use your paid account.

And Nicolas from CaptianWifi also want to know if what he suggested is working.

Unfortunately, not yet, this is a crazy story isn't it?

Jorge

Thanks Pamela32 I guess I saw a tread with your pseudo in a sailor's forum I do that in 5 minutes. Can you beleive going through all that odysea just to get a connection...And after a week and exploring different paths, still not working. Thanks for your concern, I send feedbacks after that. I am a ...

Jorge

Thanks Normis, I did it 25 times past week.
Anyhow that page, on the browser never opens with 192.168.88.1

Jorge

Merci, thanks, gracias, obligado, etc.

Jorge

It gets stuck in the slave message at the last process. I don't see how to set these dam ports in master mode.

Jorge

Everything can be setup this way except that the ports are already setup for most of them so I configure them the way you are telling me.
Here is where it bugs:There is no way to configure the DHCP in bridge mode. To do so I must be in router mode(top right of the quick set)
Is it ok?

Jorge

I get that on the Firewall/Nat ...in/out interface matcher not possible when interface(ether1) is slave. Use master instead (bridge) They are funny, how will I do that? Thousants of possibilities to setup that"thing" I guess there is a bug in that groove:it should not be so difficult to co...

Jorge

So I just tried right now to add another wlan2, no way, so I canceled, and as it does each time, I loose all the networks that where here 2 minutes ago... That thing drives me crazy, nothing works the way it should be in the config process. Could it be a corrupt system?

Jorge

Yes, without wi-fi on the mac, the groove catches various spots.
But when I try to add a wlan2 it doesn't allow me.
On thing I just noted. I connect to winbox only with the mac adress(it chooses by itself) if I try to give it 192.168.88.1. It doesn't open the config window.

Jorge

Whaou;; Thank you guys for your concern. I will try this in 20 minutes. Yes I can see the network, but only while I make the first setup. AND ONLY THROUGHT THE GROOVE. The network dosn't appears when I scan with my old Mac or my ipad. This is exactly the problem and the reason that incited me to buy...

Jorge

Yes, I tried to connect tohttp://149.202.136.85/You know...
Thanks again...

Jorge

Yes, about the password. I'm just expecting this page to pop up.
I am from Paris, that I love. But traveling so many years, I would say that I am from nowhere...But that Planet.
Cheers

Jorge

I am already bold and (shinny) and the sun is my friend.

By the way, it must be late down there in Holland, no?
You never sleep?
This forum closes at night. I tried to post last night and it was down
Cheers

Jorge

Thanks, ok, I try it right away. I do not have much hair left now, and all that game is going to help the ones that survived to fall down..

Jorge

Hy, So I went up to the end of the process. Now I have 3 wi-fi in potential of connection: The network I am using(from my phone) to write down here. The network we() just set up The groove wifi The only one abble to connect the internet is still the same, the one I am using now. Remember: I am tryin...

Jorge

It's ok up to N° 4 :"quick st enable dhcp server."
To do that I should be in router mode... Is it what should do?

Jorge

Hello,
Your are a daddy for me!!
So I try that, and you get feedback as soon as it works(optimistic isnt'it?)
Thanks again

Jorge

Hi, Here is what I received from Mikrotik: --------------------------------------------- 1. The wireless interface in station mode with the same SSID as Hotspot has, you have to get a connection; 2. Create a virtual wireless interface and set in ap-bridge mode (Access Point); 3. Put virtual wireless...

Jorge

哈哈,这是一个很好的一个。这是一个祝福,当哟u are stuck in the middle of nowhere, to have someone, in that case at 6000km from where you are, that takes his time, and the best of his knowledge, whetever it means, to give you a hand. Thanks again; I am living in a boat in Martinica, and there i...

Jorge

...

Jorge

sorry I can't acces that page. It gives me an "error 406"

Jorge

Thanks,
I'll try that.
I never thought that it would be such a fight to configure an internet acces with that device made to work"out of the box" thanks again for your time

Jorge

Thanks,
I try that and I let you know
Take care

Jorge

Thanks,
I can do every thing up to the end of the wiki.
Then I see the hotspot, but I cannot connect it if it doesn't open a web page...

Jorge

Hello, No, I do not see the page. When I do a scan I can see the network name appears, his mac adress, protocol. If I click on the line , I get an option to enter a password(that I can't input) I mailed the owner of the hotspot and he told me that to suscribe I have to get a page of the browser, tha...

Jorge

另一件事我不明白。当我设置(好吧,i try) the groove it doesn't appears in the wifi . Only can I see it when I make a reset.
I don't understand a fig.... You know, I bought it since it was written:"working out of the box"...

Jorge

Hi Normis, Squatting the thread, sorry. I'm jorge from Martinica, in a sail boat. Do you know if there is a way to downgrade a Groove to the former version, I am running on 6.39.2, that doesn't allow me to open the setup page on a browser. Also: if I unplug my groove from my macintosh leaving only t...

Jorge

Ok, so I did setup the groove the way you told me. I can see various wifi in the window. I i click on the one I wan to reach a password windows open. But what I need is to by an access, to obtain that access code. Then, all of a sudden, while i was trying to open the adress on Firefox, all the netwo...

Jorge

由于Msatter
i't's 7.40 am here, sorry for the delay. We have a hurrican passing by (Bret)...
Ok, I'll check that setting in half an hour, and I send you feedback.

Jorge

Hi, thanks for your concern. Yes, after trying everything, I push" reset config, and load default. But I can't connect the hotspot. I say again that I can see the hotspot only with the Groove , so, if I can't connect (with the Groove) no way to reach the payment page, to activate an account, si...

Jorge

Thanks,
Sorry for the delay, I will edit the tittle.
Cheers

Jorge

由于Msatter. I do have a real heavy french accent. In fact I can access the config page of the Groove, but once there I don't know what to do. I first upgraded the device, and then the access from a browser went of. Good start. Then I tried various combinations following what I read on the forum....

Jorge

Hello there,
Is it possible to downgrade the router to the former version, since that one doesn't allow to use a browser as a configuration interface?
If yes, how? I see only upgrade, no choice?
Thanks

Jorge

Hello there. First of all I'm french, so please forgive my accent... Also, a big "thank you" for all the people trying to help each other. Now, my problem, that seems universal: I can't configurate my GrooveA 52 AC to work properly. I am using an old macbook pro. First I was abble to conne...

Search found 94 matches