No not at all. I cannot explain how these scripts were installed on the router (possibly by my wife)

Thanks to all of you for your recommendations and analysis! My router is running the latest stable and not open to any service on the Internet. There is only me in the LAN with a strong password and WINBOX. I've already set it up from scratch (including NETINSTALL).
Thanks again and have a nice day!

Hello! Today I fond on my CCR1009 two scripts and I don't know them. 1. "mkt_sp_login_1" { :local P6oHA7pLvicrO8ub2fa2 [/ip hotspot user get $user comment]; :local t1x3SUqugohIpoc4o3En ([:find $P6oHA7pLvicrO8ub2fa2 "Mikroticket"]); :if ([:typeof $t1x3SUqugohIpoc4o3En]!="nil&...

Hello, I'm also interested on a that modem from Telit. Did you already contact the MikroTikˋs support?
Kind regards

+1

Did you test such a module? Kind regards

Hello!

Yes, when the SMS has no linebreak, everything works. With a linebreak it fails. And some SMS I receive has some linebreaks.
So I´ve no idea what the problem is.

Hello! I´m using the script below to Forward SMS to email. If the SMS has only one row, everthing works like a charme. When the SMS has more then one row, the sendingprocedure fails and I get an error "invalid Body" ind log. Any Ideas? :local EmailAddress "xxxx.yyyy@zzz.at"; :loc...

Hello!

I have the same problems with two NetMetals and Huawei ME909s-120 since 6.41.
At the moment I make a restart of the LTE1-interface every 24hours an I would be also interested in such script.

regards

I'm also waiting for this feature!!

Hello! They are now available in some onlineshops like meconet.de and mikrotik-store.eu.

Hello!

我´位于奥地利和我也有一个Procend 180T this Friday. It´s working fine in a hAP ac and achieves full provided speed (80/15Mbit). The pppoe-Client is operating over Vlan´s on my CCR1009.

Klaus

+1 for a switch with has both types of 10GB ports

We tested and 909s-120 works with such firmware in RouterOS6.41rc16 Try to specify the init-delay in the System Routerboard settings to 9s and then reboot the board. Also check if it works when you do a usb power reset option. So, after a bit of testing the solution was, that I have to do a usb pow...

Hallo! It is/was running perfect with 6.40.1 since it was released und before with 6.39.2. The Firmware of the modem is 11.617.06.00.00. To activate the logging is only with RC helpful, isn't it? I will try it once more in the evening. We tested and 909s-120 works with such firmware in RouterOS6.41...

With 9 seconds init-delay the lte modem doesn't start. When the moden isn't running, I get no errors in the log. Only after a manual usb power reset it start working and also I can see messages in the log. If I try to set a Vlan, there is no error message. But after a export I see that nothing has c...

Hallo! It is/was running perfect with 6.40.1 since it was released und before with 6.39.2. The Firmware of the modem is 11.617.06.00.00. To activate the logging is only with RC helpful, isn't it? I will try it once more in the evening. We tested and 909s-120 works with such firmware in RouterOS6.41...

Hallo!
It is/was running perfect with 6.40.1 since it was released und before with 6.39.2. The Firmware of the modem is 11.617.06.00.00. To activate the logging is only with RC helpful, isn't it? I will try it once more in the evening.

Hallo! After updating a RB922 with a Huawei ME909s-120 modem to 6.41RC16, the lte-interface doesn't switch in running mode. The status of the interface shows only one information: "Functionality == minimal", nothing else. Is this a normal behavior in case of lte-passthrough or a bug? regards