+1 This would still make a super useful feature. Especially if the column you really need is on the far side of the window and you have to scroll there to see what you want. But it has finally been implemented! You only need to upgrade your winbox to get this function. Ok, awesome. I see the change...

+1
This would still make a super useful feature.
Especially if the column you really need is on the far side of the window and you have to scroll there to see what you want.

Hi, I came across this script, but it wasn't working for me in ROS 6.47, so I had to tweak it a bit before it worked. :local txc :local txcA :local txcB :local txcC :local rxc :local rxcA :local rxcB :local rxcC :local rxta :local rxtaA :local rxtaB :local rxtaC :local txta :local txtaA :local txtaB...

Anyone else with a large number (over 130) of L2TP clients (only L2TP i.e. not L2TP/IPSec) notice that with 6.47, only a fraction (about 30 to 40) are able to connect to the router? I had to revert to 6.46.x to get my tunnels connected again. I have the same problem 6.46.6 all 96 clients connect, a...

Hello, I was wondering if you can help with a previous post regarding CAPsMAN setup for your application. Two of the charts uses the name of the interface for the data, but the problem comes in where if there are spaces in the interface it stops displaying the name before the space. eg. if my interf...

Hi, No worries, I got it running on Ubuntu 20.04 So I once again tried to see the devices reporting but no data. I then realized it only runs every morning at 01:00 so I tried to run it manually. Even though I have two devices sending logs to Splunk successfully (I can see my firewall traffic, but c...

Hi,

OK I will do that. Sucks that the only answer is to try another OS, but oh well.

Another thing, is it possible to monitor several MikroTik's via this system, or is it only designed for a single device?

Thanks

Hi, Thank you for all the hard work! This is really a nice tool. Can you please assist. I'm getting the following error. I'm running it on a Windows Server 2019 VM: Error in 'outputlookup' command: External command based lookup 'device_lookup' is not available because KV Store initialization has fai...

Hello, I have already configured a few mikrotik routers and want to try RBM33G, but cant connect to it. Power supply which I use is 24V 800mA, when i plug it, i see both green and blue led on, after few seconds only blue led stays lit, when trying to find router with winbox by neighbors section, no...

Hi, Below is the code i'm using in the firewall, but the principle will remain the same. add action=jump chain=input jump-target=unknown-input src-address-list=!addresslist1 add action=jump chain=input jump-target=unknown-input src-address-list=!addresslist2 add action=return chain=input This was de...

I know this is an old thread, but would just like to say this helped a lot Thanks If you want IP in list_X, list_Y, or list_Z -> action, then you can make a chain for the three lists. Put all other criteria on the jump check, e.g. port number, nth, time of day, etc) 1) all other criteria are true ->...

Hi,

Do you need all internet traffic to run on all WAN interfaces? Like load balancing, or a type of aggregated bandwidth?

Hi, I've setup a router similar to your config, but with mostly default settings. Try the following: /interface bridge add fast-forward=no name=bridge /interface vlan add interface=ether1 name=Internet vlan-id=832 /interface wireless security-profiles set [ find default=yes ] supplicant-identity=Mik...

Hi, I see you have deviated quite a bit from the default settings for your interfaces. Do you have a reason why proxy-arp is enabled for your bridge and vlan? also, why arp is disabled on ether1 interface? I would start with changing all interfaces to standard enabled arp mode. I would also untick U...

Hi, I've never had to enable dst-address-type or per-connection-classifier. Here are the rules I generally use for multiple internet connections: /ip firewall mangle add action=mark-connection chain=input in-interface=ether1 \ new-connection-mark=input-wan1 passthrough=yes add action=mark-connection...

Hi,

I will double check your admin username permissions, as some hackers move this user to the read-only group, and create their own login.
If this is the case then you'll have to perhaps restore an even earlier backup before this was changed, failing this, then netinstall is the answer.

Hi,

我假设这三个双接入设备是欺诈nected to three different ports on your MikroTik?
If this is the case you will need to mangle these connections to make sure traffic is kept separate, otherwise routing is going to get screwed up.

Hello,

CAPsMAN should handle this for you.
Otherwise you can always set a rule in the connection list to deny a certain signal strength from connecting to the AP.

You can find this under Wireless > Connect List (Winbox) or

Hi,

This is just the default config that ships with RouterOS.
You will either need to modify this, or reset config with no defaults and setup your own network.

Any port can be used for anything on RouterOS, except obviously if it doesn't do POE out it won't.

Hi,

That is quite strange indeed.
Can you please export your entire config and dump it here?

Hi,

我看不出anything out of the ordinary. You could perhaps set the channel width on both devices to 20mhz only.

Just to clarify, when you enable the 5Ghz WLAN you don't have internet anywhere? Or just on the 5Ghz WLAN? Or no Internet on either WLAN 1 or 2, only LAN has internet?

Hi,

My guess would be you are causing some sort of network loop.

Please post output of your "/interface bridge port" setup, and your "/interface wireless" setup.

I believe the issue is yourIf you look at the output through the "put" command, it will print something like "nov/19/2018"
Herein lies the issue as you can't have "/" in your name.

To avoid a lot of headache and troubleshooting, it will be much better to link up the two hAP's via ethernet and setup CAPsMAN on the main router.

Hi,

Have you also tried upgrading routerboard firmware under System > Routerboard > Upgrade?
You might also want to check the wireless encryption method ie. aes or tkip. It is better to use aes ccm only as tkip is slower.

Hi, You'll find that the RB2011 single core CPU will battle with speeds above 200Mbps. Likely the addtional NAT and Firewall rules the Hotspot creates adds extra load on the CPU? If you can, try the same rules on an RB3011 (2x core), or the hAP AC2 (4x core) and see if your speed improves. You can h...