MikroTik - Search

adrianatkins

Just that it was not available/thought of before, and now it is. Robert never said 'thanks' or sent a case of beer. They sure as shit didn't have the idea before. Sad that MT didn't pick up on something from their own forum. A brief note like 'Nice Idea, We'll develop that into a useful Product' wou...

adrianatkins

UBNT made ToughSwitch one whole product-cycle-lead-time after i posted the RB750 All-ports PoE MOD.

Fact.

adrianatkins

I've been making an AP Power solution recently, and can't help feeling that it already has been done. Has anyone found a system that :- Has 4 remotely switchable PoE outputs (RJ45) Has a secured web interface Has a four-port 10/100 switch Uses any car battery Charges the battery properly Reports on ...

adrianatkins

Would anybody be really annoyed if there was a firmware that you could flash onto a Ubiquiti device that made it look more like Mikrotik's Winbox interface, along with some of the extra features you get with Mikrotik ? Just that it'd be simpler if the engineers only had to learn 1 interface, and it ...

adrianatkins

Funny ! i got :-
+ve Karma from a Guy who used this, and found it useful
-ve karma from becarra, who thinks this is somehow to do with IPv4.

Obviously it's IPV6 ;)

adrianatkins

Click on the top option in Winbox, click all the sub-tabs.

Carry on clicking until you reach the bottom.

All that stuff - the stuff in ROS that we buy ROS for.

adrianatkins

I suppose a Magic Pixie chooses which driver.

adrianatkins

If it's TDMA, then it really really needs some time synch.

If it has none, it's like Airmax, and therefore of limited benefit.

I bet Skypilot rue the day they used a nano 2 and tested their TDMA code on it.

adrianatkins

Er, the 'Hot Blondies' is my Mother.

She is pschizofrenic, and often manifests like that.

You can call her on 089855555555555555555555555555555555555555

adrianatkins

IPv6. It's gonna happen. It *has* to happen. These are facts. WTF to do about it ? Ignore it ? I guess the 'IPv6' menu option will be the answer. However, unless all the stuff we need works with IPv6, then *we're* screwed, which in turn means we buy no more Mikrotiks. Beta will be Fine - it will all...

adrianatkins

DOH !

只是分手的权力对Cat5.
Wire them all together into a connector block.

Add your favourite PSU or power solution.

(do not use petrol for cooling)

adrianatkins

Due to the lack of a reasonable hazard, i stopped using this mod quite a while ago. Much better (and easier) to just split the PoE pairs out of the Cat5 and wire them into a chock-block. It's less neat than the PoE mod, but it allows for placing the finished assembly into a plastic bag full of petro...

adrianatkins

The sticker on my RB750 worked !

A magic pixie moved in, and i got 500Gb/s thru it for 12 hours.

I was so excited that i forgot to feed the Pixie, and it left.

adrianatkins

Schematic is there at the top.

It turns out much cheaper and simpler to just buy a 15 euro charger than making one.

adrianatkins

We just told you ... I was really asking if anyone knew how it was done. Now if it were a <0.5um process using parellelised data channels and parrallel cpus, then that'd be an answer. If it were FPGAs (like Juniper) re-flashing/configuring the logic arrays to make a super fast router, then that'd b...

adrianatkins

No Magic Pixies arrived yet.

Googling was better :http://www.bbn.com/resources/pdf/50G.pdf

adrianatkins

So, no-one really knows, but they do know that 10Gibabgit Routers exist.

Hmmm.

I wonder if my throughputs will increase if i write 1Pb/s on the top of my RB750.

I'll try it and see if the Cisco Magic Pixies decide to come and live inside my router.

adrianatkins

Both CPUs would use the same MikroTik x86 firmware - as would some others, as they are x86 architecture.

The problem would be more than just making a driver work on your specific CPU chip.
They would have to make/get a driver that would work on all x86 CPUs.

adrianatkins

Maybe i misunderstood it too.

adrianatkins

Nerja, near Malaga

adrianatkins

The Cisco routers we have support it now

Cisco still have to use existing technology. They do not have Magic Pixies inside their equipment.

How is 1 Gig or 10 GigaBit per second actually made possible in a router ?

adrianatkins

If the sensor exists, and it is an Intel chip, then it should be available as data.

I have a pile of about 70 AMD Geode based ALIX boards here in a box (Intel Compatible).

Is there a temperature sensor in those as well ?

adrianatkins

I checked, and it's a known missing feature actually.

Oooops. I have that Feature. I don't know why i stole it.

Where can i meet you to give it back.

So sorry. I don't know what came over me.

adrianatkins

OK. I've woken up now, and am interested.

Will Nv2 have some kind of time synch ?

If not, it's the same as AirMax in the sense that we can't use it effectively.

adrianatkins

Running more than 1 watt EIRP is illegal where i am (Spain) and that is the max on 5Ghz > 5450Mhz. On 2.4 it's 100mW. It's also basically stupid to have your radio running 'Hot' or Over Powered because it forces the final stage(s) of the radio card into un-designed-for areas. They make Noise, and lo...

adrianatkins

I use 10 minutes so i can se things happening faster.

If your RADIUS server is inside your network, then it is not so much traffic.

adrianatkins

In Real Life, look at the SNRs/CCQs and see if you have a good Radio connection.

Make the Radio Connection Very good, measure the speed, then try the Queues.

adrianatkins

I forgot to mention that you can tell what power the MT RB is on by monitoring the voltage it has, so you can script for whether the PSU have both failed (based on time-of-day if you attach a solar panel).

And you get a few Days of No Problem, so it's not an emergency if/when they do.

adrianatkins

Hey ! Martin !

I guess you're in Spain.

We should meet up sometime:adrian@adrianatkins.com

Be nice to me or i'll bite your ankles.

adrianatkins

Much simpler to install a PC running linux on your net, add it's IP to the Walled Garden and get some geek to write you some games, with a Pay Now option.

I doubt you'll surpass Facebook's Farmville nonsense, but you never know.

adrianatkins

You forgot to say: Make a MetaRouter OpenWRT image that allows my users to PAY to play each other online.

adrianatkins

1-gig How is that possible on TCP/IP ? More specifically, how is that possible to actually deliver that with current CPU technology - never mind the radios. With 16 simultaneous users over 1 second, that's 16 Giga bits in a second = 2 Giga Bytes in 1 second. If the CPU of the first router is at say...

adrianatkins

I did a whole load of PIC programming in assembler to get TCP/IP working over PPP on a PIC16F88 before i decided that it just wasn't worth the effort. If anyone wants the code, they can have it.

adrianatkins

I decided to settle for a really simple and easy to make AP power solution that doesn't cost much.

Features mutiple power sources, including 2x normal PSU, Wind and Solar, and about 4 days power backup for a single RB433AH all for less than you pay for the RB433.

Enjoy.

appsu3.gif

adrianatkins

Temperature sensing depends on there being a temperature sensor on the Board.

If the board has not got one, you can't magically make one in software.

adrianatkins

Nothing can really stop all P2P traffic, because we have to allow some traffic, and the P2P guys are really quite clever. If you really want to kill all P2P, you would have to :- 1. Block All traffic being forwarded thru your router. 2. Proxy DNS on the router 3. Allow port 80 connections and 433 ma...

adrianatkins

Martin, es tu debere a bajar tu obession del internet y encontrar una Mujer.

Tengo una, pero puedo dar te 78 Camels si te hace falta.

adrianatkins

i think im gona try that idea of yours Not my idea - it's all there in the LARTC examples. RTP is the voice stream, so that's the one that will make most difference to your calls. If you're using one or two VoIP providers, it mght be easier for you to just mark packets going to their SIP server IP ...

adrianatkins

Feature request :
I need a solar powered MESH Mikrotik,
and a Link calculator to see how many Camels
i need to install them on to cover the Sahara Desert.

A Camel Cost Calculator would be nice too.

adrianatkins

Looks like you're getting there Zappa ! It just occurred to me that you might see the Mikrotik Queues working fine, only to find that VoIP still doesn't work brilliantly under heavy traffic load. First off, SIP is just to set the call up - RTP carries the actual Voice data, so give 'em equal (highes...

adrianatkins

sorry - i missed your post on the other topic.

i was only really looking at a coova-chill alternative cos of what you lot said, and found pepperspot.

i looked to see which hotspot solution to include in my firmware ....

adrianatkins

Where did the php come in ?

Did you get a free ssh applet for php and insert the CR/LF into the password ?

adrianatkins

What i really really cannot understand is why anybody using, well, cheaper gear would imgaine that they can compete on the same level with people using much more expensive gear. Currently the 'fasion' is for super-duper-fast (100Mb/s+) internet everywhere. It is a Lie. Those speeds aren't available ...

adrianatkins

Glad to hear that we helped.

Now slap us with some Karma or you can tickle my tummy.

adrianatkins

> and the "forward mangles donot seem to work" ? Depends on whether the packet's you're expecting are being Forwarded. E.g. : a packet destined for the Router you're on will not hit the Forward rule - it will hit the Input rule. Queue Priority does work, but it is unclear (to me) if MT imp...

adrianatkins

pepperspot.sourceforge.net seems to support IPv6

adrianatkins

something better to do than troll a router manufactures forum?

Is there anything better ?

Maybe i need to get out more.

adrianatkins

If you're new to all this, better off keeping it as simple as possible. Yes, have Two networks on your ether2 - no problem, but i guess you just want to keep the WiFi clients from messing with the APs - just change the passwords on the APs..... Set ether2 with 10.16.0.1/24. Set all the APs's to use ...

adrianatkins

What's the best way to separate Access Points from Wi-Fi users?

There are many ways to do this :-

1. Remove the AP so the users can't connect to it
2. Charge Money - the users will go and look for a Free AP.

adrianatkins

500Mb/s is a lot.

Are you sure you want a 68 euro device to handle Wire speed connections between maybe 10 devices ?

What's your budget ?

Depending on the Budget, you might be better off with a much faster mikrotik with more ram.

adrianatkins

I suppose that from the point-of-view of the Kernel, all the ether1, ether2 and the VRRP interface are all separate interfaces. Having the same network on all three would cause it some difficulty in working out what interface it should use to send data to the 192.168.1.0 network. Try a different sub...

adrianatkins

A super cool thing would be for the Mikrotik to detect what it's lacking, based on how much fannying around the admin user is doing (and how often) and automatically send that info to MT so they can automatically include a new feature to do whatever the admin was doing all that time. Auto feature re...

adrianatkins

i just can't make it work on rs232

Neither could I when i tried.

adrianatkins

I think you'll have to run OpenWRT in a metarouter, and disable the serial console in ROS to get what you want.

adrianatkins

4.RX (open collector input)
3.TX (open collector output)

You sure they're Open Collector ?

That'd be very very odd if they are.

adrianatkins

Features ? ROS got more than enough already for the Class it is in.

adrianatkins

I've already hung a router (physically close) by doing auto discovery That tends to happen. Nobody seems to know why, but it does. It's safer to map the network as you go - manually. I also run several separate networks, and map them all on a central Dude using PPtP tunnels from the 'remote' networ...

adrianatkins

what dog? i have seen him, it's his picture

Cheers Normis. I get fed up explaining about my Ancestors in the Ruski Sputnik dog-breeding programme.

Just cos i'm a dog dunt mean i can't do technology.

adrianatkins

why do you feel this discussion is even relevant to you?

Good point.

I'll stop sticking my furry nose in then.

adrianatkins

I think its been going on a year now w/ no fix.

Ah. That's a big Oooops then.

bugs and exploits

Bugs maybe. Exploits certainly.

adrianatkins

How about a Mikrotik firmware for a Nanostation that we pay a licence fee for ?

Say $10~$15 ?

Level 3 ?

I *know* MT can do the firmware with no probs. Just a matter of Will.

adrianatkins

Apparently they cant either.... That's not quite fair. They haven't yet fixed the bugs is more like it. Maybe it's a sad case of sucess - they've got so many different platforms and have added so many features that it is getting too hard to keep up. OverMoaning about it on their forum got me perman...

adrianatkins

Finding the problem in the coding is hard. Much harder when there is more than 1 programmer on it, cos everyone has a different style and way of thinking. Give them some time, because each problem you found was in a different area of code. I sure as shi'ite couldn't find, then fix (100% sure) all of...

adrianatkins

Does nobody else find it interesting how Sales and Marketing can influence the Minds of people ? There is no *need* for IPv6. It is simply a logical Upgrade to IPv4. However, it is now Urgent for what reason ? Sales. Lots and lots of Sales - by transit providers and reg authorities. It is unlikely t...

adrianatkins

OH !

I fogot to mention - have a look at your Idle Timeouts under both server and client profiles.

adrianatkins

Why not just make a Wireless security profile that authenticates the connectng MAC using Radius ?

The whole idea of hotspot is to redirect connecting users to a Pay Now page.

adrianatkins

Even blindfolded, naked and with no tools, I can do better than that

Never do dodgy electrical wiring in the Nude.

You never know where the shortest path will go.

adrianatkins

that one looks good.

adrianatkins

Don't get too excited.

I suspect we can't Breed.

adrianatkins

You have to try things.

Nobody really knows.

We just charge you for it if you don't.

adrianatkins

Well done to You for identifying a Serious problem. It is Bad that the Problem is there. It is Excellent that you have provided a lot of data, because now the programmers can find the problem and fix it. Most of the time people just say 'X does not work'. Wha you have done is to provide the informat...

adrianatkins

most parts of the real world hand out public v4

Maybe i have always inhabited parts of the Unreal world. Maybe a Virtual world.

Still seems to make money

adrianatkins

I've tried all sorts of things. In the end i;ve bowed before Local Knowledge and buy a totally UV stable (lasts about 5 years) plastic box with grommets all over it. Costs about 10 euros. When i first saw them i laughed, and the locals sniggered. After being up a pole with an antenna case-combo that...

adrianatkins

If you already have a Stable network, why change it at all ?

Add to it by all means, but to upgrade everything seems a bit crazy.

adrianatkins

DOH ! Sorry to miss such an obvious thing like the RTT = 10ms. The Radius accounting records *might* not be any problem at all, depending on how the server side maths are done. The accounting is done base on the 'username' in the database, and also on the *diference* between the last Accounting reco...

adrianatkins

I'm surprised 3.30 actually works on it at all.

The CPU and general architecture will be the same, so all that is missing is the driver for the Atheros 9xxx chip.

Still, it is amazing that such complicated stuff works at all when randomly stuffed onto a board it was not designed for.

adrianatkins

If your Customer is complaining that the Speed is not correct, you should ask them what they are using to Prove that it is not correct.

There is no point at all using a *perfect* speed test measurement if your Customer does not agree with it.

adrianatkins

Cheers for the link to the great article normis. Basically IPv4 is fine. It's just that like every resource available on this Planet, the Greedy Bastards Want More. So, once again, we'll skip over making the very very best out of a proven, understood and workng technology in favour of some new s'hit...

adrianatkins

What about those of us using the hotspot as an Ethernet authentication method

So do I in most cases on the WLAN side, but the temptation to just stick a Downstream HotSpot on it and add a binding on the Upstream HotSpot is tooo easy to *not* do.

adrianatkins

So you're not an Internet Service Provider then. Please forgive my presumptiousness. I've only been in internet since about 1990, so i still have a lot to learn. It's was a real help to have gotten into electronics 11 years earlier, and programming a year after that, but i only started business on ...

adrianatkins

IPv6 dunt werk on HotSpots yet.

adrianatkins

I have several PPPoE - ADSL setups which look the same, i.e. the gateway is 192.168.153.1 for all (up to 4) of the PPPoE connections. It doesn't seem to matter, probably because the gateway is the interface, not the IP. I have to admit that i looked at it and thought WTF when i first saw the same ga...

adrianatkins

What Karma ?

adrianatkins

There's no point baulking at what people like to charge, and claim that it's 'unreasonable'. The highest fee i ever charged was 700 pounds for 1 hour. What i did saved them 4 million quid, so it was well worth it, and only took half an hour in the end. For me to send you a CD, or even a letter will ...

adrianatkins

The 2.4Ghz cards you can buy are quite heavily targetted at the legal channels. Performance starts to roll off sharply below 2400 Mhz, so if you have lower power available on 2.3Ghz, you really need to find a specialist manufacturer of equipment for that frequency. Having said that, the 'normal' fre...

adrianatkins

Do you mean that you want to set up a HotSpot on an interface, or what ?

Please explain how people connect to it, and how you want it to behave.

adrianatkins

Groovy.

The presenter needs telescopic arms though, like Stretch Armstrong.

adrianatkins

Somebody else asked about this in a more recent thread. How about bridging all the APs back to a central 'server' using EoIP ? All the same subnet, so no IP-swap issue. Maybe with a long DHCP timeout so avoiding that delay. You still would have the Time it takes to disassociate from one AP and assoc...

adrianatkins

Has it stopped being a problem ?

If so, what was it ?

adrianatkins

in case anyone wants it..

You started off asking a question, and unfortunately nobody knew, read your post, or wanted to answer.

It's all a self-help thing really, so why not just post your script solution so the next person who needs it can find it.

You'll get all famous and loads of Karma.

adrianatkins

Do not paste things into passwords fields when you do not know what the actual characters are ?

I suppose this is a classic case of a User Interface doing more than you knew about, or asked for.

adrianatkins

彭妮我猜……

adrianatkins

Don't you think you're being a bit harsh ? Finding 4 bugs (there are certainly more) in something as complex as ROS is quite a small number really. 1. Ping is a very blunt tool, and if it doesn't work perfectly, i personally would not put it at the top of my 'to fix' list. Having said that, ICMP ech...

adrianatkins

It is very odd, but it's midnight and i'm typing this into a wesite to people i have never met. I wonder why ? I have More interesting things to do, a TV, and a Bed to go to, so there is no Logical reason to do it. Internet is doing something very odd to us Humans - Facebook, Twitter etc is Proof of...

adrianatkins

get used to the idea that their Internet connection isnt going to have a static v4 globally routed address to use

You mean like what most users have already ?

I have never sold a public IPv4. Never will.

adrianatkins

LOL @ ur avatar.

What avatar ?

Mine's a Webcam and i just put my specs on.

adrianatkins

Filter, NAT and Mangle.

Queues are different.

adrianatkins

的IPs的——我们是一个严重的事情re (did ages ago actually). IPv6 (i forget where i read this) has enough to give 1500 addresses to each square foot of the surface of the earth. DOH! The designers forgot that we want to address each self-replicating Nanite individually. I'm not happ...

adrianatkins

无法给用户了我1 v4 IPf you have just 1 public v4 (with enough speed attached), you can have plenty of IPv4 private space to make a Mint. Hmm. That's what we do isn't it ? IPv6 is Coming Soon, but don't bother suggesting IPv4 will get turned off like analogue TV. IPv6 wa...

adrianatkins

I thought most Implementations came from whitepapers (RFC springs to mind) ?

Are you asking *if* it will be done, or *how do i do it now* ?

adrianatkins

Downstreaming from a Client-facing hotspot isn't a brilliant idea.

I have did that a few times because it is cheaper/easier than putting up another antenna.

To save cost/hassle/security error why not just make a VAP on the same interface ?

adrianatkins

I can Google !

Can i get MTCG now ?

http://www.kernel.org/doc/ols/2003/ols2 ... -34-43.pdf

adrianatkins

What if UbiTik was a Mikrotik product ?
Leverage what you already got in new ways.

New/More Market Share. More forurm posts. More Normis avatars (happy smiley ones).

adrianatkins

Similar device.

I stopped buying those aluminum cases ages ago !

They leak.
Condensation forms easily.
The rubber gasket falls out.
The Hex-head cover screws weld themselves in and need drilling out after about a year.

Use a different case !

adrianatkins

God, Mikrotik and the Laws of Economics all conspire to protect the eager MT User : the PCB power tracks are too thin to support a fire-making current. Basically there's a fire-preventing Fuse already there. You do have a serious point though. Preventing Fire is the best thing you can do to protect ...

adrianatkins

You might have noticed that you can drag a rule up or down in the list.

That's so you can set the Order in which they get processed.

The Order can be very important.

adrianatkins

Queuing is where you need to be. Traffic Control is where all the Top Jobs are because it can be incredibly complicated. You should start with Queue Trees, and remember that the Queue only acts on Outgoing Traffic through an interface. MT confuses it a bit by using an Intermediate Queuing device (IM...

adrianatkins

There are no mainstream Linux developers (that i know of) working on IPv6 NATting because it ruins the fundamental beauty of IPv6 - no need for NAT. Of course it can be done, and will eventually be part of the stock linux Kernel v9.12.34, but there is no perceived need, so it makes no progress - cur...

adrianatkins

Not to ask a blatently stupid question, but given that the current HotSpot code runs IPv4, why would you *need* it to support IPv6 (on the client-facing side) in your own lifetime ? IPv4 NATing, IPv4->IPv6 translation on the HotSpot router sorts it doesn't it ? 'Legacy' IPv4 support will be around f...

adrianatkins

Why do you want to do Free Trial every day ?

adrianatkins

this is a VERY CRUDE VB6 program

Less crude than the underlying Windows operating system !

Well done !

adrianatkins

Bonding *can* be done across several ADSL lines despite the ADSL ISP saying No. However, you have to have your own co-located server somewhere with Huge bandwidth and unlimited GB/month, and bond all your connections back to that. It does work, but is more cost and latency (i found) than it is worth...

adrianatkins

In the end I just want to have a kernel which can load the needed proprietary drivers from NAND and boot linux rootfs from microsd card. The Drivers aren't too hard to do. Booting from the MicroSD is harder, and there are a lot less of us that ever even dare mess with redboot. Is it too much ? Yes,...

adrianatkins

complaining on the community forum, where nobody can help you.

Bizzarely, some of us could help ....

adrianatkins

RouterOS will almost certainly be *based* in OpenWRT, or possibly even an earlier incarnation. Without a doubt it is based on a mountain of GPL code, starting with the Linux Kernel. Even so, People should *not* imagine that ROS is just a 'bit of a tweak' to Linux. It's the product of zillions of man...

adrianatkins

Try typing your password normally, and then press Ctrl-N, Ctrl-J (depends on your keyboard ?)

All you really want is the characters adding.

I've not tried this, but it *might* work.

Alternatively reset the board to defaults.

adrianatkins

Why not set up a PPP server on the serial port ?

if you send FF 03 at it occasionally, the PPP server will send you loads of stuff.

Better still, implement the LCP bit of PPP and 'talk' to it - once LCP is up, the PPP server will keep sending LCP 'pings' once in a while.

adrianatkins

No ! I don't run 240v up the tower. Personally i avoid towers as they normally have other people's stuff up there. Just run all your cables down from the top as normal. At the BOTTOM, split out the PoE pairs and wire them together into a chock-block. Add whatever PSU you need for all of the kit comb...

adrianatkins

It might work better (*maybe* more 'seamless-ish) with EoIP tunnelling.

Try it with a couple of APs linking back to another mikrotik as the 'server'

adrianatkins

passthrough means 'process the rest of the steps or not'

if you tick it, then any rule below the one you're talking about has a chance to change stuff.

Un-tick it, and the rule you made is the Final Answer.

adrianatkins

WiFi generally is done badly by people who need it to work to make money. There are very very few who can afford to 'do it properly'. There is a much bigger number of people who can buy some stuff and slap it on a tower. Even when the physical links are 100% wonderful, there is an even smaller numbe...

adrianatkins

This hack works OK, but i gave up on it a while ago.

It's easier to just split the power pairs out of the Cat5 and join them up to the power supply in a chock-block.

That way also means you don't have to have any specially modded parts in stock.

adrianatkins

Watts = Volts time Amps So if you got a 15v PSU, and assuming X devices at 8 Watts each, PLUS the RB750 itself .... PSU Watts = X+1 times 8 Amps = (8(X+1))/15 e.g. For 3 x 8 Watt Devices plus your RB750 on a 15v PSU =(8(3+1))/15 = 32/15 = 2.13 Amps Personally i just buy IBM Laptop power supplies rat...

adrianatkins

Why does MT not want to port ROS Firmware to other manufacturer's hardware ? Perceived Market Advantage might be a reason, but the way Ubiquiti has been adopted kind of blows that out of the water. You already (regularly) port it to New hardware platforms (your own new ones), so you can clearly do i...

adrianatkins

I've got qute a few (50+) Rb750's out there with various firmware versions on them. I have not seen 1 single ethernet lockup yet, and they are in varying environments and with varying loads. Always look at the Power Supply as your #1 culprit for wierd faults. I put batteries on everything wherever i...

adrianatkins

I've got an email from interprojekt.pl flogging a 19db antenna, case and Rb711 for $69.

Brilliant CPE at that price.

adrianatkins

Page seems to have gone. I guess the CIA or NSA got there quicker. My real point is that by even *trying* to target P2P protocols, which ipp2p and L7 did, you simply force the P2P people into other Open methods like SSL. Any New P2P programmer will (i would) say fukit: use SSL, cos then they will fi...

adrianatkins

Like i said earlier before Normis (blessed be his Name) correctly banned me temporarily :- You Cannot Block P2P. MT's 'all p2p' option is based on the ancient and umaintained ipp2p filter. It doesn't block all P2P - it can only match P2P traffic that it knows about. Layer7 is brilliant. You can matc...

adrianatkins

Queues are quite complicated. default and default-small are just names MT give 'em. Look under Queues->Queue Types to find out what they really are. i think 'default' means pfifo, and 'default-small' means sfq by, er, default. pfifo = first in-first-out, or no real queuing at all (by packet, hence t...

adrianatkins

4ee3da217c.jpg

adrianatkins

Maybe you should get them all to email Mikrotik.

If there's enough interest, maybe they'l choose a MUM other than mine !

adrianatkins

There is no 'answer' to P2P. You might as well say "i want to block Internet". The *only* solution is to control the user's bandwidth. If they use it all up with their P2P, maybe their Skype calls will be flaky. They learn quick. When people buy "Internet", they expect it *all* t...

adrianatkins

can anyone remind me what this post was ?

adrianatkins

Autopelo

adrianatkins

Woohooo !

一个成功的故事!

Congratulations, and well done.

adrianatkins

Did you get anywhere with this Gunther ?

I'm not asking you to share or anything (and i'd be surpirsed if you did after the reception you got) just curious if you made any progress.

adrianatkins

tum tee tiddly dee

adrianatkins

do you need mangling at all?

Only a true bloodthirsty (but polite) 1000 year old warrior would ask that question !

You must be the Kurgan !

There Can Be Only One .....

adrianatkins

The first post looks good, but i'd be much happier if there were two or three bricks on top of the legs as well as under them.

Where i live we get really strong winds in Feb + March.

The Dish would Fly.

adrianatkins

This is good. read well.
http://www.gdd.net/index.php/LogZilla_I ... tion_Guide

adrianatkins

I'm getting really annoyed that you all keep posting *only* photos of *my* installations. Also, how come you know where they all are around the world ? Are you MI5 ? Lastly, i left my new shoes in the shoebox, so if you could lift up the battery and get the shoes, and send them to me, i'd appreciate...

adrianatkins

Nope.

It's two connectors on 1 Radio.

You can use Main or Aux, but not both at the same time.

When you select one, the other will not work.

adrianatkins

If you've got a Mikrotik as your gateway, you might try replacing the ADSL router with an ADSL Modem, and using PPPoE on the Mikrotik itself. ADSL modems are about 10 euros hereabouts. There will still be some NATing going on (has to be done) but you might at least get some control of how it does it...

adrianatkins

All depends on exactly what you're looking for.

I bet you wish there was an out-of-the-box-and-working solution !

adrianatkins

Quite right - Always set the DF flag.

'Optimal' is a tricky one.
Whatever gets through is good, but too low and some websites break, and there's not a lot we can do about it.

adrianatkins

How do you know who said that ?

adrianatkins

I trade as Autonomo, so my name is, er, my name.

adrianatkins

OK. That's the kind of data i was looking for. Thanks.

adrianatkins

We currently pay $250/mo

How many punters do you get billed for $250 ?

adrianatkins

Sounds like a Great Idea.

TCP only Internet. Bliss.

adrianatkins

Like the man says.

You *can* do it on one radio card, but you'll get much better speeds if you use two.

adrianatkins

Madre mia !

Martín, if you dont get it, nobody will.

I might as well stop trying to see if anybody wants what the likes of Vodafone, O2 etc have, and just use it myself.

adrianatkins

Maybe there's a Session Timeout box filled in with 00:08:00 instead of 08:00:00 ?

Either in Radius or on the Mikrotik on the tower.

Have a look at the radcheck/radgroupreply records for a punter on that tower.

adrianatkins

Check out the post by gunther01.

He's working on a solution.

adrianatkins

maximum MTU that was going to repond without frag Almost everything (including XP) sets the IP 'dont fragment' flag these days. ICMP PMTU (Path MTU) discovery is blocked in so many places that it is also basically redundant. MTU refers to the IP layer of the connection. It is the biggest packet tha...

adrianatkins

Beware !

COA will only work for you if the RADIUS server has access to your network, and you have allowed Incoming Radius on the mikrotik.

You'll also need something to actually push the COA requests.

adrianatkins

Nope. i have not tried ROS 5 yet.
It didn't work under ROS 4 either.

Useless feature really.

adrianatkins

How much would this lot be worth to you ? :- 1. Complete Bandwidth Control (as it says. too much to list) 2. Hard-Limits on per-month usage (they use their 3Gb, got to pay more) 3. HotSpot Income (they can connect at 4am and pay you) 4. Tickets for HotSpots (print your own money) 5. Customer File (a...

adrianatkins

I did all of that in what i call VX.

It's a Radius based system, and dynamically bashes the queues, who's authorised etc etc etc.

It was a Huge amount of work, but sorts it all out.

Trouble is, everyone wants it for free.

adrianatkins

Your ISP sounds nasty.

Telefonica (in Spain) are very helpful. If you send too many emails, they block port 25.

adrianatkins

It can be done, but it is too complicated to say 'here's how you do it'.

There is another thread by gunther01 looking to do something similar, and he says he's working on it.

adrianatkins

The trouble is, you said 'Canopy' in your Subject line. Most mikrotik users *hate* canopy cos of the interference and subsequent problems it causes a non-canopy user of the same band. Re-post it with "How do i get bitrate in Device map instead of Link map ?" and i bet you'll get a lot more...

adrianatkins

PCC might be a good idea.

I have no idea what the speeds of your connections are, but PCC will load-balance across the two connections, and automatically fail-over to the other one if one fails.

adrianatkins

Apparently only *some* micro-SD cards will work.

All the ones i got off Ebay work fine in everything else (iPhone, several cameras etc) but not on the MT board.

I fannied about with it for ages, and gave up - stuck a USB hard disk on it instead.

adrianatkins

What Logging software you need depends entirely on what you are trying to Log.

What exactly do you need to Log, Why, and is that Legal in your Country ?

adrianatkins

Zappa - you got to TRY stuff and LEARN. Set yourself up behind a mikrotik and apply some queues to yourself. If you don't want to spend 2 days or a Week on a course, you got to follow the Super-Nerds like me, and spend months fiddling with yourself. (more correctly speaking, the queues etc that you ...

adrianatkins

Seems not.

6 days and still nothing useful.

adrianatkins

can u please review tht product and let me know

No f**king way.

YOU install it and review it and let US know what you think about it.

adrianatkins

syslogd -r

on a linux box will stash all the log entries into a file (or files) as you like it.

Searching 100Gb of text takes quite a while though, which is why i found logzilla.

Stop being lazy and try one of the suggestions.

You may have to put *some* effort in .....

adrianatkins

Al most all microsoft stufff needs rebooting periodically. As fewi says, it's a 'quick fix' that you have to keep doing. The reason is normally what is called a 'memory leak', although there are many other possible reasons. A 'memory leak' is simply when a program asks the OS for some memory, the OS...

adrianatkins

Rebooting/resting is a crazy idea.

The equipment should stay working 24/7, so Cooling would be a good plan.

However, if turning them off for 30 mins a day works for you - i can't really say it's 'wrong'.

Whatever makes it work for you is generally a Good Thing.

adrianatkins

There are many many ways of doing this. The simplest thing is make a 'Parent' queue, and then, as you guessed, make 'Child' queues under it - with each traffic type having a different Priority. The Whole traffic will be subject to the Parent Queue, and, like you say, the Children wll fight for their...

adrianatkins

You could hook an old microline dot-matrix printer to a linux box, and get it to print the logs as they come in.

You may need a *lot* of paper.

adrianatkins

All depends on what you mean. Mb/s download (UDP or TCP) Mb/s Upload (UDP or TCP) Mb/s Up+Download (UDP or TCP) at the same time .... etc etc. I get 106Mb/s UDP one-way-only thru one of my 'N' links. I expect that will be drastically less for TCP, but haven't bothered finding out, cos it's faster th...

adrianatkins

Cee U Next Tuesday!

Whay do you want to see him next Tuesday ?

adrianatkins

I bought one once off ebay.es Admin username was 'Martin', password 'Ruiz' ........ :lol: It had a load of Advanced Traffic Shaping, Advanced Wireless and User Management info on it. Also quite a lot of unusual WiFi-related porn ... the things you can do with an antenna, even the square ones ! Don't...

adrianatkins

You need a Linux PC with a BIG hard drive.

I run a linux box with a 500Gb main Disk and a 1Tb secondary hard disk.

Install mysql, syslog-ng and logzilla.

Set the Mikrotik routers to log all forwarded traffic to your Logging server.

Expect to be logging a Huge amount of mainly useless junk.

adrianatkins

TCP 3-way handshake done.

Even a Windows PC will talk to me now.

i just got to figure out what it's saying, and extra happiness results.

adrianatkins

you should turn up the power a little bit

Ah. The slippery slope towards illegal EIRP.

Up the Power. More ! More !

Maybe it's a Good thing you don't do wireless. (definately a Smart thing).

adrianatkins

Do you ever get the feeling that you're being ignored ?

What exactly is the port 60000 service ?
TCP, UDP or what ?

adrianatkins

Go to their house and steal their Laptop.

Works every time.

This is a popular choice - see Ebay.

adrianatkins

Sorry, but the board is broken.
Send it back and/or get another one.

adrianatkins

All Firewall rules imply actuall inspecting the data that goes thru the router, and that takes CPU time. Arguably Layer-7 takes the most time, especially with big patterns. NAT takes time and memory. Each NATed connection eats about 340 bytes of RAM. If you use all 65535 ports, that's about 21Mb of ...

adrianatkins

there can be queues within queues within queues .... and so on. E.g. Let's say you want to have HTTP, DNS and POP go fast. Just use the IP-Firewall-Forward tables, and make a Packet Mark (for example). Create a new simple queue (Queue trees take more planning). Add a new Queue, give it some guarante...

adrianatkins

HotSpot will certainly do it. If it's just 20 clients, and will never be more, you might find it easier to just add the users under IP->Hotspot->Users(tab) That will be a pretty quick start for you. If it will definiately grow > 20 users soon, then you will save yourself a lot of hassle by learning ...

adrianatkins

Open Usermanager, find client.
Highight email-address. Ctrl-C.
Open email program, click New Message, Ctrl-V.
Click Send ?

adrianatkins

If you do not know what to do because - well, you don't know - then you might as well just NAT everything. in Winbox, click IP->Firewall->NAT (tab) Click the red cross to add. 'src-nat' should be the default under the General tab. Click Action tab. Select 'masquerade'. There are a lot of downsides t...

adrianatkins

Mikrotik shows Queues rather oddly IMHO. It goes against common sense to Queue some traffic to speed it up. However, what isn't obvious is that ALL traffic is queued in Queue Prio 8 by default it seems. So, if you add a stream of traffic to Queue Prio 1-7, then it will have priority over all the res...

adrianatkins

Statics & routed. Good. It might make things easier if you have Queues called something like OK-1M, SLOW-1M etc. Then if they have bought the 1Mb package, and they go over whatever limit, you just need to change the first part of the name of the queue they're in. That way you could also see at a...

adrianatkins

ditch this whole webserver on mikrotik idea That'd work best. The only reason you'd ever want to do it would to be to save some money. In a 'real' environment, such a lightweight webserver wouldn't be used. However, the MetaRouter + OpenwRT works as a webserver on a Mikrotik, as well as it doing th...

adrianatkins

They aren't Alive you know.

There's no little men inside getting tired.

adrianatkins

PLEASE attend some training? Any training?

I didn't

adrianatkins

RouterOS *could* run on your Dlink, but i doubt you'll pay to get it ported.

Bin the dlink (better ebay it) and buy a RouterBoard.

adrianatkins

parser ...

adrianatkins

turn off automatically using electric timer for half an hour a day

Why do you do that ?

It is very unusual.

adrianatkins

I'm pretty sure you'll be looking at something else as the numbers go up, but hey - if it works for now, good. Very good that you're thinking about it now, and not when there are 299 complaints. The first issue is how to identfy individual Clients. *if* you have a fully routed network, then you can ...

adrianatkins

Firmware really, not hardware.

I got to ask - why does it get the power cut off so often ?

adrianatkins

You *can* run dude on it (i think) but you'll have to be very miserly wth things like Graphs (cos it stores the graph data).

Better to have something else, like an RB433UAH and buy a cheapo external USB hard drive.

adrianatkins

Any more "progress" on the SolarTik project? A bit more PowerTik (nee solartik) progress :- PPP protocol cracked, so the board can plug in the serial port. We got connection (LCP) We got an IP address (IPCP) We got ICMP - it Pings ! Now working on TCP (which quite hard in 4k of code space...

adrianatkins

The only problem i forsee is the issue of scaleability. If it's all contained inside the 1 router, what happens when you got 1000 users and multiple internet feeds ? Is it more a question of making the 1 router balance it's own traffic more 'fairly', or is it a centralised 'system' for controlling t...

Search found 556 matches