MikroTik - Search

ToTheFull

(/日志打印消息~ 46:3D) 08-22 07:28:59wireless,info 46:3D@wifi1 connected, signal strength -82 08-22 07:28:59 dhcp,info defconf deassigned 192.168.0.100 for 46:3D 08-22 07:29:00 dhcp,info defconf assigned 192.168.0.100 for 46:3D 08-23 07:07:08 wireless,info 46:3D@wifi1 disconne...

ToTheFull

Bit more info here about the Auto join process as well.
https://support.apple.com/en-gb/102169

ToTheFull

Just to add my two pence worth here about 1 apple device I have, I now only run WPA2 because it's a WPA2 only device, and also only allow that device to connect to my 5G AP's as it seems to want to have a fight when the device is allowed to choose between 2.4 and 5G WiFi. It does silly things like @...

ToTheFull

You can filter by MAC where XX:XX is to make life easy

/log print where message~"XX:XX"

ToTheFull

Looking over this again, the power requirements are without attachments which I never intend to use. So the Question again is if I feed 28V to the 5009 will it output 28V to the following items or just not work? Cap ax Power requirement Max power consumption without attachments 12 W Hap ax2 Power re...

ToTheFull

Is this the same as 7.12alpha74 ?

ToTheFull

What is the main use case for the PoE version then cameras?

ToTheFull

In all honety I wasn't looking at the PoE outputs because I've only ever used Injectors. That would mean about 1Amp each at 28V so yeah no go, It wouldn't be a problem but my Hap ax2 has a faulty power socket which I am now going to have to change, I do have the sockets I just need to install it. So...

ToTheFull

Not sure on Power Supply needed to feed both Hap ax2 and Cap ax over PoE or weather to just get the none PoE device, so here is my thought process. Thoughts on buying this RB5009UPr+S+IN or this RB5009UG+S+IN and using Injectors supplied. "All power options support a wide voltage range of 24 – ...

ToTheFull

I moved straight to 7.12alpha...
Sorry if I gave bad info.

ToTheFull

"Available from 7.11 (currently in RC)"

Mikrotik RB4011iGS+5HacQ2HnD-IN stable ROS 7.11 he didn't get an option Back to Home VPN.

??

They had a change of heart!
viewtopic.php?t=198228#p1018758

ToTheFull

So far so good for me, except small problem with AC getting sa querry timeouts every 2-3 minutes for few days. Right now i think is good but i will continue to monitor situation. I have 1 device that jumps between 5G and 2.4G on the same AP a hAP ax2, drives me nuts but I'm pretty sure it's a duff ...

ToTheFull

I've had good luck with 7.11beta6 on my cAP ax, up over 3 weeks now with no problems. uptime: 3w1d9h58m21s version: 7.11beta6 (development) build-time: Jul/18/2023 11:06:26 factory-software: 7.7 free-memory: 608.5MiB total-memory: 928.0MiB cpu: ARM64 cpu-count: 4 cpu-frequency: 864MHz cpu-load: 0% f...

ToTheFull

What version is it you are using ?
7.10.2 resolved that problem for most

ToTheFull

Woohooo!
want to see how the little fella performs, watching intently.

ToTheFull

From 7.11beta5. I sent mail to support with logs and supout file.

Thanks I'll stick to beta5 for a bit then.

ToTheFull

Updated to 7.11rc1, noticed frequent SA Query timeouts, like every 2-3 minutes for my air conditioner, no problem with signal as both AC and AP are in the same room, signal level is -41

Which beta did you come from 5 or 7?

ToTheFull

Of course you can just keep using Wireguard. This new feature is also using Wireguard, but it has one advantage, it can work even if your router has no public IP

Thanks for the further info. Great feature by the way!

ToTheFull

Silly question, but is it safe to just use the wireguard app with the QR code as I already installed that on the other-halves phone which seems to work ok but took ages to connect? Android by the way.

ToTheFull

I just see CAPsMAN as a Flex

ToTheFull

Great little Video fully 'njoyed it, I was relieved to see the drip loop and silicon used at the end.
Every fibre of me was screaming bring the cable out the bottom though lol..

ToTheFull

Thanks for the FIX for the QR code, much better!
Re-downloaded as advised.

ToTheFull

I was going to try this...
https://youtu.be/KO9wbarVPOk?t=209

ToTheFull

This might help and even give some background for your use case.
https://www.youtube.com/watch?v=yD8aq4KSWko

ToTheFull

Even Zoomed all the way out I couldn't see all of the QR image. If I zoom out first it only shows Half of the image.
Display 1440x900 so that might be the problem.

ToTheFull

Sorry I misunderstood what I was looking at regarding BTH.
Great service.

ToTheFull

strike that

ToTheFull

Turn off use random MAC Address per device, long shot

ToTheFull

谢谢团队。
*) wifiwave2 - fixed registration table statistics (introduced in v7.11beta4);

ToTheFull

不知道,但我能说的就是它的工作like a charm I'm not saying that mine doesn't work like a charm either, I was just trying to understand why it didn't log the link-downs, it turns out they are not link downs. It's the amount of times the radio has no clients connected to the radio...

ToTheFull

Depends on the CPU you have on that VM and the available network card. Ok so installed Hyper-V then CHR on Windows11 yup Windows11 it works now I guess. https://www.youtube.com/watch?v=RQ-52Ih_MmQ But guess what, it's the same as btest.exe oh well more useless info gained so someone else doesn't ne...

ToTheFull

Same thing is on 2.4 GHz interface, no links down.

Maybe Caps Mode stops that happening ??

ToTheFull

I have 11 Link downs This number indicates how many times no clients have been connected to the interface. It is only relevant when there is a client that is permanently connected (radio bridge mode). PS The screenshot shows just the moment when there are no registered clients. That makes sense as ...

ToTheFull

I don't have a problem with 5G either, I just wanted my wifi stats to work again so I rolled back. I'll move forward again when it's fixed!

ToTheFull

I have 11 Link downs on my cAP ax but nothing reflected in the logs 7.10.2

ToTheFull

so what they are trying to say is use this instead.. whats goin' on, silly games...? Why can’t I add attachments? Attachment permissions are granted on a per forum, per group, or per user basis. The board administrator may not have allowed attachments to be added for the specific forum you are posti...

ToTheFull

If only I had that much bandwidth

27 Mbps... meh

ToTheFull

I wasn't aware that it didn't work properly Windows btest.exe.
erm.. how about x86 Mikrotik in a VM would that work properly ?

ToTheFull

Off the top of my Head, i've never heard of anybody being done for WiFi related issues with home equipment.
Plenty of Pirate Radio Station though!

ToTheFull

Works fine from Mikrotik >> Mikrotik status: done time-remaining: 0s ping-min-avg-max: 145us / 214us / 436us jitter-min-avg-max: 0s / 20us / 291us loss: 0% (0/200) tcp-download: 929Mbps local-cpu-load:59% tcp-upload: 932Mbps local-cpu-load:42% remote-cpu-load:87% udp-download: 943Mbps local-cpu-load...

ToTheFull

Also for me the 7.11beta4 version fixed the problems with the wireless, it had been unstable for months. Finally a stable wireless connection and no more phone calls for complaints... Great job MikroTik 8) same here - after beeing completly frusted seemd that 7.11b4 fix my problem with unstable Wif...

ToTheFull

@erlinden Test to a proper linux server (iperf3 v 3.9) gives me no such nonsense. So that would be a no it doesn't do the same thing. iperf3 -c 192.168.0.22 -P 10 -b 50M -u -R [SUM] 0.00-10.01 sec 597 MBytes 500 Mbits/sec 0.000 ms 0/432120 (0%) sender [SUM] 0.00-10.00 sec 596 MBytes 500 Mbits/sec 0....

ToTheFull

Can you perform a test with two machines, using i.e. iperf? It would seem so. I'm getting some strange results, So I'm testing from a PC to pi4 8GB. I'm going to spin up another server later to test again. If I use multiple streams Linux to Linux? WSL I'm loosing as you can see below But.... If I t...

ToTheFull

Not sure what I might be doing wrong but hAP ax2 UDP Upload test is low when testing from Router speedtest tool (Console) to Btest/server on PC. Doesn't seem to matter if it's wired or wireless. tool/speed-test address=Local status: done time-remaining: 0s ping-min-avg-max: 1.75ms / 2.62ms / 3.89ms ...

ToTheFull

I might roll-back to get my wifi stats back!

ToTheFull

7.10.2 stable has the fix as well now What's new in 7.10.2 (2023-Jul-12 12:45): *) wifiwave2 - fixed interface hangs on IPQ6010-based boards (introduced in v7.9); What's new in 7.10.1 (2023-Jun-27 12:03): *) ovpn - fixed OVPN server peer-id negotiation; *) webfig - use router time zone for date and ...

ToTheFull

It will make one firewall rule: 0 D ;;; cloud vpn chain=input action=accept protocol=udp dst-port=xxxxx Thanks, it just can't be that simple for me can it. i give up. /ip/cloud/set back-to-home-vpn=enabled expected end of command (line 1 column 15) All my services are dissabled apart from Winbox.

ToTheFull

The Back To Home process will activate wireguard on your router and setup a dedicated tunnel, make some IP pool, some firewall rules (? didn't check?), .... It should not break anything else but since this is so new, I wouldn't do this on a device which you need to be operating for others. At home ...

ToTheFull

Easy Now... I've never used a VPN/ set one up etc... yes I know, small world I have tunnels running through my router that I have no control over, will the following process break anything ? Install wireguard.... PC 1.Connect to router 2.Enable DDNS Cloud service: `/ip/cloud/set ddns-enabled=yes` 3....

ToTheFull

Just for the Record i don't see them on either cAP ax or my hAP ax2 cleared the cache still no. anyway I don't have a phone to try either :(

ToTheFull

统计数据报告将在未来解决βrelease, clients should still work as expected.

@Guntis thanks for taking the time.

best regards

ToTheFull

For anybody qurious about the TX-RX problem being fixed in 7.11.beta4 it isn't....

They didn't say yet it was fixed

I'll take another Power nap then, nothing to see here, move along!

ToTheFull

For anybody qurious about the TX-RX problem being fixed in 7.11.beta4 it isn't.... uptime: 13m32s version: 7.11beta4 (development) build-time: Jul/05/2023 10:33:54 factory-software: 7.5 free-memory: 619.9MiB total-memory: 928.0MiB cpu: ARM64 cpu-count: 4 cpu-frequency: 864MHz cpu-load: 0% free-hdd-s...

ToTheFull

what power frequency are we taking about. 5745 for example for france is 25mw 8/9db For my cAP ax in the UK I have, bearing in mind +6db antenna gain for 5G I think. state: running channel: 5180/ax/Ceee registered-peers: 2 authorized-peers: 2 tx-power: 16 16+6=22 which is correct for that frequency ...

ToTheFull

Strange thing is that i never had this problem before upgrade, i don't live near airport or any other facility that should have radar installed... I will search what are non DFS frequencies in my country and set AP to that frequency... But like I said never had this problem before... Welcome to the...

ToTheFull

Also, I started to receive radar detection messages on one of the CAP's but not on the other one... And frequencies are all over the place... I've not had any issue so far on my cAp-ax fingers crossed. Also intresting to note that devices in CAPSMANN AP and Router configuration are showing the same...

ToTheFull

Anybody else with 0 Bytes wifi 2 A interface=wifi2 ssid="" mac-address=60:6B uptime=20m49s signal=-92 packets=0,0 bytes=0,0 tx-bits-per-second=0bps rx-bits-per-second=0bps 3 A interface=wifi2 ssid="" mac-address=F2:AA uptime=8m26s signal=-54 packets=0,0 bytes=0,0 tx-bits-per-sec...

ToTheFull

Anybody else with 0 Bytes wifi 2 A interface=wifi2 ssid="" mac-address=60:6B uptime=20m49s signal=-92 packets=0,0 bytes=0,0 tx-bits-per-second=0bps rx-bits-per-second=0bps 3 A interface=wifi2 ssid="" mac-address=F2:AA uptime=8m26s signal=-54 packets=0,0 bytes=0,0 tx-bits-per-seco...

ToTheFull

Thanks snagged a copy

ToTheFull

Editing posts to make them to your taste is NOT.

Sounds very creepy....

ToTheFull

I had reduced speed at channel 144 you know this already.

ToTheFull

CMD prompt
netsh wlan show interface

ToTheFull

Push it harder.. 20 streams
iperf3 -c -P 20 -t 50
About 50% all cores ax2 for me

ToTheFull

I'm having a much better exerience with hAP ax2 7.11-Alpha127 (7.11Beta2) Installed beta2 on cAP ax today no issues do far, also notice since 7.7 the Radar Detection problems I was having have gone so thats a Big Plus. speeds and signal have varied since 7.5 on my hAP ax2 at least so it's an on-goin...

ToTheFull

Pick the bones out of this hAP ax2 5500Ceee Speedtest from rpi4 through router to pc (primitve but hey!) Singlethread iperf3 -c 192.168.0.135 - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 719 MBytes 603 Mbits/sec 271 sender [ 5] 0.00-10.00...

ToTheFull

/interface/wifiwave2/monitor wifi1 state: running channel: 5745/ax/Ceee registered-peers: 1 authorized-peers: 1 tx-power: 9 available-channels: 5745/ax/Ceee This is on ax2 Thanks yet again for trying, yours seems ok the rates are low because of the power level I was testing with 19. All testing sto...

ToTheFull

I changed frequency to 5745: interface/wifiwave2/registration-table/print detail stats Flags: A - authorized 0 A interface=wifi1 ssid="Mikrotik" mac-address=XX:XX:XX:XX:XX:1C uptime=7m1s signal=-51 tx-rate=720.6Mbps rx-rate=960.8Mbps packets=724,854 bytes=452507,122083 tx-bits-per-second=...

ToTheFull

Will try it tommorow, wife is streaming her show on netflix so now it's not a good time to mess with the wifi

cheers, that woudn't be a good idea no!

Beer Oclock plus Movie...

ToTheFull

Yeah the speeds TX vs RX much better compaired to yesterday aye. Flags: A - authorized 0 A interface=wifi1 ssid="" mac-address=C0: uptime=5h51m56s signal=-55 tx-rate=300.0Mbps rx-rate=300.0Mbps packets=5311,5691 bytes=294076,241276 tx-bits-per-second=0bps rx-bits-per-second=0bps 1 A interf...

ToTheFull

Now I've moved to 5500 Ceee I'm even again. It's more than like I've been on 5745 Ceee for so long you tend to notice small nuances. Slowwly been moving around using Auto which has just kept moving me down in frequency to my delight. The reason I fixed the frequecy previously was because being kicke...

ToTheFull

Yeah it's just the 1 device that has played up so far, thats a wpa2 only device that Apple refuses to stop supporting gah!
I've moved on to testing Auto now and seeing how I get on with the "radar detected" situation I was having fun with last time I tried.
Any-who gong off topic here.

ToTheFull

If I had a lab I would, not happy sharing all my Live Enviroment if I am 100% honest after mooching through the supout.rif myself.

ToTheFull

good plan. Here's the pattern from last night from just the 1 device, WiFi 5 Ipad Air 2 playing up. Jun/20/2023 20:24:21 wireless,debug 26:@wifi1 reauthenticating Jun/20/2023 20:24:22 wireless,info 26:@wifi1 disconnected, SA Query timeout, signal strength -54 Jun/20/2023 20:24:22 wireless,debug 26:@...

ToTheFull

Umm.... 20:24:21 wireless,debug 26:@wifi1 reauthenticating 20:24:22 wireless,info 26:@wifi1 disconnected, SA Query timeout, signal strength -54 20:24:22 wireless,debug 26:@wifi1 disassociated, SA Query timeout, signal strength -54 Help me understand! Edit add: So here is the same device deciding to ...

ToTheFull

Yes manually set just to check what I was using like for like. I'm updating the cAP ax tomorrow if the hAP ax2 keeps behaving itself.
pretty impresed so far, I will then start testing auto and the dreaded radar frequencies to see how that goes now!

off to watch film...

ToTheFull

I'm on 5500 MHz:

ahh sorry below it cAP ax then ?

ToTheFull

@gigabyte091
Thanks for that might just be the frequency I'm on.....

/interface/wifiwave2/monitor wifi1 state: running channel: 5745/ax/Ceee registered-peers: 3 authorized-peers: 3

ToTheFull

I'm testing the hAP ax with no changes at all. 5 hour uptime all devices, no devices dropped or giving errors so far so very positive today. I didn't want to jump in and say it's all good but I feel it needs a mention for anybody thinking of testing on a hAP ax2 I would be happy to say go ahead. Ok ...

ToTheFull

@Guntis thanks for the Alpha will test!

ToTheFull

Much better Thankyou
hAP ax2

ToTheFull

After 12 days I got PMKSA error with new phone, but after disabling and then enabling phone's wifi i got no error and phone connects to 5GHz radio. I will pay more attention to logs for a few days now just to see if this is some kind of one time error now or it will get more common. Same here about...

ToTheFull

If it all worked as expected, I wouldn't feel the need to be here and chat OR express my thoughts but apparently people are to eager to bash others for having a mind of their own it would seem. Look I've tried all the versions since owning Mikrotik AX products for the first time this year. And for m...

ToTheFull

Lets see how many drop in on this thread and say 7.10RC1 is still no good, that will give us a better idea. On Reddit I'm seeing people say 7.10beta5 still no good.

ToTheFull

You why?
Is that a problem?

ToTheFull

Move forward to 7.10rc1. +1 No isuue here 7.10RC1.... uptime..... sys/reso/print uptime: 5d19h13m17s version: 7.10rc1 (testing) build-time: May/25/2023 13:01:12 factory-software: 7.5 free-memory: 604.9MiB total-memory: 928.0MiB cpu: ARM64 cpu-count: 4 cpu-frequency: 864MHz cpu-load: 0% free-hdd-spa...

ToTheFull

I never use auto, here are some tests from today. I have Big Ears... Huge Ears with ax210 hAP ax vs cAP ax but the hAP is on channel 144 vs cAP on 44, slight version change as well on both. First test is just a pass-through speed test hAP ax to cAP ax, secound test is best effort WiFi test PC to hAP...

ToTheFull

I'm all good here now the SA timeout problem has subsided for some reason on one device that had an issue, as of today I'm now using wpa2/wpa3 ccmp/gcmp 5g only on hAP ax (7.10RC1) as Router. And my cAP ax 2.4g/5g is still storming along no issue still on 7.10 beta5 go figure! uptime: 2w4d7h48m39s v...

ToTheFull

I am still getting a lot of "can't find PMKSA" even with the 7.10rc1.

What samsung device is that (C8:) your having trouble with.

ToTheFull

Out of curiosity, has 7.10rc1 fixed issues with AX devices?

Thats a loaded question, I think the answer is it's to early to tell yet for some.

ToTheFull

2. "association SA Query timed out" - it is 802.11w Protected Management Frame related. Looks like it started when i turned on FT (Fast BSS Transition (802.11r)). Getting these Ipad Air 2 7.10RC Only wpa2 enabled. Is this Normal ? 18:55:16 wireless,info XX:XX:XX:XX:XX:XX@wifi1 disconnecte...

ToTheFull

Getting these Ipad Air 2 7.10RC Only wpa2 enabled. Is this Normal ?
18:55:16 wireless,info XX:XX:XX:XX:XX:XX@wifi1 disconnected, association SA Query timed out, signal strength -51
20:02:13无线信息XX: XX: XX: XX: XX: XX@wifi1说connected, association SA Query timed out, signal strength -52

ToTheFull

cAP ax, ax2, ax3 no PMKSA error when using WPA2/WPA3 for now, tested with Samsung S10, 2 x Xiaomi 11 Lite 5G NE, Laptop with Intel AX200 WiFi card.

Cheers thats helpful!

ToTheFull

It would be helpful to know if the fix that was given in thisviewtopic.php?p=1003934&hilit=wifi+ax+lineup#p1003788thread was added to 7.10RC

ToTheFull

Thanks save me the bother

ToTheFull

What's new in 7.10beta8 (2023-May-22 18:52):
Anybody tried it yet ?

ToTheFull

Left of quick links

ToTheFull

At least I'm not Blinded everytime I open the forum, so I am happy for it to stay!

ToTheFull

I installed the 7.10b5 + firmware and it lasted a few hours before showing the "key handshake timeout" errors again so I had to reboot it. I have a router that needs rebooting 1-2 a day and a support ticket with zero response from Mikrotik. Ridiculous... I'll process a refund on the devic...

ToTheFull

By default TX power is at maximum ?

For your country yes. For other countries No!
Take a look hereviewtopic.php?p=1001491&hilit=ranges%3A ... 0#p1001491

ToTheFull

By default TX power is at maximum ? Right now I have only one cAP ax operational, another one is in the box. I think that next weekend i will replace U6 lite with cap ax, i think that wifi is now stable enough for me. Only, i will have to leave WPA2 so my wife can connect to wifi with her laptop Sw...

ToTheFull

/interface/wifiwave2/radio/reg-info country: Croatia number: 0 ranges: 2402-2482/20 5170-5250/23 5250-5330/23/dfs 5490-5730/20/dfs 5735-5875/20/dfs

Minus antenna gain of course!

ToTheFull

How much power are you using, all of it ?

ToTheFull

It looks like I started getting these 4 days in on both radios on cAP ax. About 1 per day across both radios and different devices. Any thoughts please. 05-11 06:31:45 system,info router rebooted 05-15 10:25:43 wireless,info F4:XX:XX:XX:XX@wifi2 disconnected, association SA Query timed out, signal s...

ToTheFull

Yea, i was thinking about that, just to try it, I saw some default configutations on Mikrotik wiki.

Sooo... I ordered two cAP ax... you know... for when drivers get even better...

Hahahahahahahaha too funny!

ToTheFull

仍然在这里,wpa2 / wpa3启用任何两家公司A errors. uptime: 6d11h29m2s version: 7.10beta5 (development) build-time: May/09/2023 10:38:53 factory-software: 7.7 free-memory: 619.1MiB total-memory: 928.0MiB cpu: ARM64 cpu-count: 4 cpu-frequency: 864MHz cpu-load: 0% free-hdd-space: 95.2MiB total...

ToTheFull

For sure it is. But it depends on the connected clients. It may well be that your modern clients on 5GHz have no problem, and the old crap or IoT devices (ESP based) have problems. Interesting, in my case all devices that experienced problems were at most year and a half old, also had problem on In...

ToTheFull

My uploads were aweful, like I said above, i need to test more! but whatever type i used over time it got worse be-it cake/FQ_Codel or simple queues. now i've downgraded all is well. Ok I use only DSCP-based marking of traffic and translation to 802.11p priority tagging which is processed by my DSL...

ToTheFull

Sadly I've had to downgrade to 7.9 due to problems with QOS. What did you configure w.r.t QoS and what problems do you have? I presume it isn't related to qos-hw. My uploads were aweful, like I said above, i need to test more! but whatever type i used over time it got worse be-it cake/FQ_Codel or s...

ToTheFull

Sadly I've had to downgrade to 7.9 due to problems with QOS. I hope you open a supoort ticket wit supout.rif before downgrade.... I need to do more testing, that would mean starting fresh from 7.10 and setting up again which I didn't have the time for. I do however have my cAP ax working with Zero ...

ToTheFull

Sadly I've had to downgrade to 7.9 due to problems with QOS.

ToTheFull

I see, so the order in post #12 is okay if you wish to use it. I think the best thing to do now is export my config and add those. Edit: So this is the same but i just wanted to keep the format the same as whats in the .rsc file before uploading when next able. /ip firewall filter add action=accept...

ToTheFull

In the screenshot, you have at least 13 filter rules. Now you have less than that. What is going on? /ip firewall filter add action=accept chain=input comment="Established, Related, Untracked" connection-state=established,related,untracked add chain=input action=drop connection-state=inva...

ToTheFull

Yes I've downdraged to 7.9 from 7,10 and reloaded my working config again hence less rules, My queues were are a mess since I updated to 7.10 yesterday I was just wanting to try FastTrack to see if that was working ok. WFH is arriving back soon so I only have a short window to play so i need to move...

ToTheFull

I'm having masive problems here, I've downgraded to 7.9 now. Edit: Also using simple queues with that stock firewall Rules: Flags: X - disabled, I - invalid; D - dynamic 0 ;;; defconf: accept established,related,untracked chain=input action=accept connection-state=established,related,untracked 1 ;;;...

ToTheFull

Their we go, does it matter that the rule is at the bottom ?

ToTheFull

I'm reloading my config and forcing myself to DO it!

ToTheFull

Thanks for that much appreciated

ToTheFull

Don't worry I've reset the device!

ToTheFull

Yes that

ToTheFull

I deleted my fastforward rule instead of dissabling it when I started using QOS. I am having a bit of a problem with QOS at the moment and would like to disable that and re-instate the fastforward firewall rule. Can anybody give me a leg-up please. firewalls arn't my strong point! hAP-ax

ToTheFull

Thanks, very useful!

ToTheFull

The only thing I can find in my configuration of 7.10b5 is QOS simple queues Upstream isn't working as expected. But even better news, switching over to FQ_Codel is working very well. WiFi in general seems a lot more stable.

ToTheFull

I have a couple of devices that do as below, but as far as I am aware that is just part of a sleep function while the device is idle. I also make sure I have at least 1 device connected to each radio that never sleeps, as well as that I don't use dfs frequencys. At the moment I have a hAP-ax2 (Uptim...

ToTheFull

So 3 people with the same problem then so far.

ToTheFull

I had a strange crash last night, I couldn't connect to any wifi on my cAP-ax which caused big slow-downs on my main router (ax2), tried restarting a few times but still the same. IE I couldn't connect to it via ip.. only by using MAC address, so I just snatched it off the ceiling and left it off al...

ToTheFull

This works for me, cap ax upstairs, hAP ax Living room. 3mtr test below TX power 9 cAP ax is running 5180-5250 TX power 16 0 name="wifi1" mac-address=xx:xx:xx:xx:xx arp-timeout=auto radio-mac=xx:xx:xx:xx:xx configuration.mode=ap .ssid="" .country=United Kingdom security.authentic...

ToTheFull

Love my hAP ax2 & cAP ax

ToTheFull

我的帽子ax关灯(中心按钮)按钮而不是我们rking 7.9rc3, If i go to System/LEDs/All LEDs Off/immediate it works fine.
Just aside note, I didn't check the function on the factory installed version. Would be great if someone could check thanks.

ToTheFull

Is this related.viewtopic.php?p=996965

ToTheFull

Here's mine, idle and under load. hAP-ax2 1 Client Temp Idle system/health/print Columns: NAME, VALUE, TYPE # NAME VALUE TYPE 0 cpu-temperature 53 C status: done time-remaining: 0s ping-min-avg-max: 158us / 229us / 3.17ms jitter-min-avg-max: 0s / 59us / 3.01ms loss: 0% (0/200) tcp-download: 938Mbps ...

ToTheFull

Hi, just curious to know if anybody else has bridgeport Unknown for wifi1 in the ip/dhcp-server/leases section using Winbox.

ToTheFull

I have a Hap ax^2 and would like to extend my WiFi with a cAP ax WiFi-6 Device. Will roaming work between both of these devices. Also does this make sense for a home network or would I be better off buying an RB5009 and 2XcAP ax's even though I only have a 200MB connection.

Search found 132 matches