我是using CHR with Mikrotik 7.10 on Proxmox. On Proxmox Host Intel X710 Virtual Function I set: echo 8 > /sys/bus/pci/devices/0000:04:00.0/sriov_numvfs ip link set eno49 vf 0 mac 48:df:37:27:3b:00 trust on I have ether1 with vlan100 on Mikrotik VM. Everything works fine until I add vlan100 to bridg...

I have the same and SR-IOV also doesnt work for me.

SR-IOV is working fine only on Mikrotik 7.1. It doesn't work anymore on Mikrotik versions 7.2 - 7.6.

Please fix it.

我是using RB4011 with wifiwave2 package. 1) How to set fixed outdoor channel? When I set Frequency to 5500-5700 in Wireless tab then it dissapear after a few moments. After a couple of hours then I see "changed intended channel to 5280/ac/eeeeeCee. Maxium tx-power for outdoor channels (5500-57...

IP address on vlan over vpls interface caused Kernel Panic and reboot on all 7.x versions. Please fix it.

7.2.3

*) vpls - fixed "pw-l2mtu" parameter usage;

Its not working...

VPLS interface over MPLS in L2MTU shows nothing - just actucal MTU.

7.3beta37

*) vpls - fixed "pw-l2mtu" parameter usage;

It works fine. L2MTU looks normal here.

请在7.2.3修复它。

Unfortunately, the VPLS does not work with an MTU greater than 1500. When I set the PW L2MTU higher, it does nothing. L2MTU is not displayed at all :( Yes, I can confirm that issue. v7.1.3 and 7.2rc4: ping 172.16.70.1 do-not-fragment size=1501 SEQ HOST SIZE TTL TIME STATUS 0 172.16.70.1 timeout 1 1...

DefConf gen: Unable to find wifiwave2 interface(s)
error while running customized default configuration script: interrupted

- its normal.

RB4011 Normal works only with 5Ghz card with wifiwave2 package. 2.4Ghz cards doesnt work.

Do you see 5Ghz interface after change to wifiwave2?

The card doesn`t touch any components. It is fitted ok.

Do you have any other advises?

No. That's a very bad sign. Entries there are created by PCI subsystem driver and any hardware properly functioning should appear there even if ROS doesn't have driver for it. Try to re-seat the card in the miniPCIe slot and make sure it doesn't move afterwards (e.g. when you're fastening the screw...

Is the card listed in/system resource pci?

No.

I have RB4011 (WIFI version). I tried to change Mikrotik R11E card to Compex WLE1216V2-20, but that card wont work - I need 2.4Ghz with wifiwave2 package. Compex card isnt even detected in Resources/IRQ. R11E card normal working in that RB4011. Compex card is normally recognizable by PC so its OK. I...

Maybe it will be simpler to write Winbox for Chrome?

It will be multiplatfrom like UBNT Disovery.

I have HP DL20 G9 with Intel C232 chipset and mikrotik does not recognize drive connected to usb. I set boot to "legacy boot" and pendrive with mikrotik 6.39rc55 does not boot. I just only get: Loading system with initrd ERROR: could not find disk! Please attach it to somewhere else. It is...

Hi,

When RouterOS v7 beta1 is gonna to be released?

RB9xx了太不兼容2 x2 30 mhz + 30mhz

Hi, I have a problem with MT 6.x. When I`m connected to MT x86 by winbox I`ve got TX/RX Drops and winbox is lagging. Traffic is all fine no TX/RX drops, only when I am connected by winbox then I see many TX/RX Drops only on interface with winbox managment. My server is HP ML 110G7 with 2x Intel 1Gb/...

Does 30 mhz channels are already possible on AR93xx?

If it`s not maybe ETA?

Hi,

I want to buy RB911G or new SEXTANT with 600Mhz CPU.

Which radio chipset does it have?

Does it support for 60 Mhz channel on extra-channel license on MT 6?

Does TX drops already solved on vlans?

Does tx dropped frames on vlan has been fixed on rc13? I have BGP x86 on 6.0rc12 (build 13.03.2013), after 14 days uptime i can see 18 000 tx dropped packets. Everything was fine on 5.24. please clarify, where do you see dropped packets exactly? can you show the output ? http://i47.tinypic.com/534j...

Does tx dropped frames on vlan has been fixed on rc13? I have BGP x86 on 6.0rc12 (build 13.03.2013), after 14 days uptime i can see 18 000 tx dropped packets. Everything was fine on 5.24. please clarify, where do you see dropped packets exactly? can you show the output ? http://i47.tinypic.com/534j...

Does tx dropped frames on vlan has been fixed on rc13?

I have BGP x86 on 6.0rc12 (build 13.03.2013), after 14 days uptime i can see 18 000 tx dropped packets. Everything was fine on 5.24.