MikroTik - Search

chiefbmr

I recently installed a CSS610-8P-2S+IN switch. I have a 60ghz Ubiquiti backhaul and a 5ghz Mikrotik backhaul for backup plugged into it. Somehow it works perfectly out of the box with default settings. All of my traffic goes through the 60ghz link. When the 60ghz link goes down in bad weather the sw...

chiefbmr

Is there a way to use two 20 mhz channels instead of one 40 mhz channel? There is never enough clear frequency to get a good 40 mhz channel. And even then I can't get 200 mbps throughput on a 40 mhz channel. But I can get a solid 100 mbps on one 20 mhz channel. Would be nice to use two 20 mhz channe...

chiefbmr

Are you using the L2TP VPN server in RouterOS?

Sorry, Yes I am using the VPN server in RouterOS.
Thanks

chiefbmr

I use to run a PPTP vpn server but now switched to L2TP/IPsec server. Setup like Wiki and other examples have explained. Android clients work fine. Windows clients can't connect. Is there something simple I am missing. I have played around with various security settings on server with no luck. Tried...

chiefbmr

I have two apologies for Mikrotik. One for not realizing the CRS328-24P-4S+RM was announced and another for saying it didn't mention POE output in newsletter. I was looking at the CRS326 by mistake. Sorry for that. But trying to find out what is out, coming out soon, and planned for the future gets ...

chiefbmr

They failed to mention it was POE out on all 24 ports in newsletter.

Well that is fantastic then. But when can we get our hands on some I wonder?

chiefbmr

The question shouldn't be - Is there any plans for a 12+ poe switch compatible with most IP cameras and IP phones? The question is - When will this hardware be available, and what is taking so long for Mikrotik to realize :shock: that this would be a bigger seller than all other products combined in...

chiefbmr

An hAP mini with LCD screen. The only thing the LCD needs to do is display live traffic on WAN port. or something nobody else has out An hAP mini with a built in projector that displays live WAN port traffic on the wall. or An hAP mini with video out port that transmits live WAN port traffic to some...

chiefbmr

My first examples had more traffic and more connections.

traffic 2.png

As the connection number goes down things look right.

traffic 3.png

chiefbmr

As far as I can see the difference in numbers is proportionate to the number of connections open. In my case I have a 10 Mb simple queue. It limits at 10 correctly, but the more connections that open, the simple queue traffic graph increases. But the traffic to the customer stays at 10. And that tra...

chiefbmr

Thanks Tom, tested 500/500 perfectly.

chiefbmr

One more thing I've thought of (did I already mention this before? if so, sorry for being repetitive) is that fasttrack will jump over queues - could any traffic be getting fasttracked? I don't fully grasp the fasttrack feature. But it doesn't show any fasttrack traffic under IP Settings. I don't s...

chiefbmr

chiefbmr When you carried out the torch did you locate where the traffic was coming from and to. Next time run a torch showing the ports etc. Try and track it to an internal device. Mine there was one computer going out to one remote IP and there was extra traffic coming back from that IP that the ...

chiefbmr

And the torch on the wan interface for the same IP as queue shows consistently about 4 Mbps more.

queue2.png

chiefbmr

I have a similar problem. 10 Mbps simple queue consistently shows 14 Mbps on queue traffic tab. But torch shows exactly 10 Mbps. The client's wireless bridge shows 10 Mbps.

queue.png

chiefbmr

When will LHG 5 be available in the the US?

chiefbmr

How about dynamic objects? Similar to the color changing links. I have been searching for a simple rf mapping program for years. Basically a color coded map of APs and backhauls that would change colors if the channel was moved. And be able to create groups of equipment that have overlapping signals...

chiefbmr

First off let me say that anybody with a negative post towards Mikrotik and the Dude can go to the UBNT forum and take their tickle tortures and pillow fights with them. What is so hard to understand about: This will be a base on which we will start building The Dude for the future. Show some suppor...

chiefbmr

I'm trying on windows 8.1 now and can't get a simple ping probe to work. It seems that windows 7 or earlier are most compatible, so gonna stick with that for now.
Thanks for comments.

chiefbmr

I've installed the Dude on several different hardware and software combinations. I plan to start from scratch with a fresh install. What is your preferred hardware and software. I had the best luck with my last server which was an Intel Core I3 running Windows 7 Pro. Then one day it decided to not l...

chiefbmr

I have 3 public gateways set up using load balancing. The customers have private IPs using NAT. The problem I am having is the gamers are getting kicked off because their Public IP address is changing during the game. This also happens on some financial and email sites. I fixed it by mark routing an...

chiefbmr

I don't think the airpoint pro will associate WEP or no WEP. I never could at least. The airbridges will connect though.

chiefbmr

I added a new mangle rule with action mark routing for the src address. I then added the default route and gateway for the new group. Still doesn't work.

chiefbmr

I have 3 public gateways. I am using load balancing setup exactly like the example on wiki with mangle and src-nat masquerading on the LAN. Everything works great but I can't get the private IPs to go to the gateway I setup with the mangle and route. It jumps around to all 3 of the gateways. Sometim...

chiefbmr

Can there be a src-nat rule added to make it go through a certain gateway?

chiefbmr

I have 3 public gateways. I am using load balancing setup exactly like the example on wiki with mangle and src-nat masquerading on the LAN. Everything works great but I can't get the private IPs to go to the gateway I setup with the mangle and route. It jumps around to all 3 of the gateways. Sometim...

chiefbmr

You REALLY do need a spectral analyzer to diagnose this one.

That is my half cent

This is not an option. Other APs work fine, mikrotiks should to.

chiefbmr

I have three gateways balanced to the internet. I want a certain IP on the private side of my router to stay on one gateway. I can't figure out how to make the table in version 2.9.41. I setup the rule for src-address=192.168.2.100 dst-address=0.0.0.0/0 and then set the interface I want it to go out...

chiefbmr

If this is some type of DOS attack, could it make the router become completely unresponsive, even to the serial port?

chiefbmr

Sorry should have put this in networking section.

chiefbmr

Can somebody explain these log messages for me? They seem to be killing my router.

chiefbmr

Maybe you could shows us the steps you are taking. The manual is pretty straight forward on NAT. There should be some examples that would show you how to do it.

chiefbmr

I have an old routerboard don't remember the model number, running prism and never have a problem using Mikrotik 2.8.21. Have a mix of tranzeo, CB3s, zinwell, and Smartbridges for CPEs. Been up for over 2 years without a problem.

chiefbmr

Better CPE? I thought their 133 boards were having the same problem. From what I have heard it happens with just about every chipset out there for CPEs.

Maybe we need to find better APs? Haven't had this type of problem with any of the other APs I have had.

chiefbmr

Obviously there is a problem either within mikrotik or the cards. I am wondering why someone from mikrotik hasn't chimed in yet to let us know which one it is. At least let us know which cards do work fine with this configuration. This is what I was going to upgrade all of my APs to and use for all ...

chiefbmr

Has anybody tried the Compex WLM54AG card yet. Do they have the same issues?

chiefbmr

Worked on it some more last night while everbody was hopefully sleeping. Tried every different config on the AP with no luck. Sometimes most of the CPEs asscociated and other time 1 or 2. There is about 25 total. Sometimes when I made a change to the wireless card like channel, the card doesn't even...

chiefbmr

I am having the exact same problem with the same setup with the SR2 card. Still waiting for a solution too.

chiefbmr

我也有这个问题。使用routios版雷竞技官网入口erboard 532 and SR2. Setup as AP Bridge. Have to disable and enable. CPEs are a mix of CB3s, Smartbridges and Zinwell boards. I did notice that if you let it sit for a while groups of the CPEs will associate. Like 5 first then 10 more 15 minutes later. Difffer...

chiefbmr

Anything new on this. Is mikrotik working on a solution?

chiefbmr

The senao will not transparently bridge. Any device behind it will show up as the senao MAC.

chiefbmr

Why do you think it is a load balancing problem. I don't have a problem with it.

chiefbmr

Can anybody recommend a motherboard that has at least 3 PCI slots that will work with the Routerboard44 Cards and Mikrotik?

chiefbmr

You could also add another queue and set limit to like 10K for the entire interface and put at the bottom of the queue list. That way all other IPs not listed would have only 10k of bandwidth. But you would still have to worry about them guessing an IP that has a higher queue which would cause IP co...

chiefbmr

Putting 2 Routerboard44 cards into an Intel motherboard. Specs here: http://www.intel.com/products/motherboard/d945gnt/ Only 1 port out of the 4 show up on each board. I can put the older Routerboard24 cards in and it works fine. Any suggestions? I tried to disable onboard USB, Parallel, etc. with n...

chiefbmr

So you would say I need some type of extra security right?

chiefbmr

Have a PTP setup with XR5s. Both sides set as bridge and using WDS. Do you think there is a need for extra security like WEP? Each side should only allow the other MAC address to communicate right?

chiefbmr

Use the WDS example. Then set up a bridge on each side with the ethernet port and WDS interface.

chiefbmr

lastguru, thanks for the reply. You are awesome. I added a new queue and moved it to #0 and it worked perfect.

I also deleted some of the queues that I had for some interfaces that I didn't need. Now all of them work.

So what was the actual problem?
Thanks,
Chad

chiefbmr

I have been over the manual and understand the new way of doing simple queues. But for some reason the new ones that I add do not work. I can even copy one of the old ones that work and change the name an IP and it still doesn't work. Is there somewhere else that I should be looking for the problem?...

chiefbmr

I recently upgraded from 2.7 to 2.8. I had simple queues set for limiting up and download by IP. After the upgrade I am having problems adding new simple queues. They simply don't work. All of my original queues that were added in 2.7 work fine. I set the new simple queues up exactly like the ones f...

Search found 51 matches

CSS610-8P-2S+IN with two wireless backhauls

Use two 20 mhz channels instead of one 40 mhz

Re: L2TP/IPsec VPN server to Windows Client

L2TP/IPsec VPN server to Windows Client

再保险:新坡硬件IP摄像雷竞技官网网站下载机和IP电话

再保险:新坡硬件IP摄像雷竞技官网网站下载机和IP电话

New POE hardware for IP Cameras and IP Phones

Re: Routerboard Hardware wish list

Re: Some traffic not seen on PCQ Queues

Re: Some traffic not seen on PCQ Queues

Re: 3.5 GIG - Public-Mikrotik-Bandwidth-Test-Server

Re: Some traffic not seen on PCQ Queues

Re: Some traffic not seen on PCQ Queues

Re: Some traffic not seen on PCQ Queues

Re: Some traffic not seen on PCQ Queues

LHG 5 Available?

Re: Dynamic background on The Dude 6.34rc41

Re: The Dude is back! v6.34rc test build released

Re: What is the ideal hardware/software Dude setup?

What is the ideal hardware/software Dude setup?

3 Public Gateways using one IP and Load Balancing

Re: Smart bridges Air Point cannot connect to MT AP with WEP.

Re: Policy Routing based on Client IP Address

Policy Routing based on Client IP Address

Re: Client IP not going out correct gateway

Client IP not going out correct gateway

Re: SR2 re-associate problem

How to route traffic through one gateway?

Re: ISAKMP Packets Killing Mikrotik

Re: ISAKMP Packets Killing Mikrotik

ISAKMP Packets Killing Mikrotik

Re: Nat

Re: SR2 re-associate problem

Compatible motherboard with at least 3 PCI slots

Routerboard44 only 1 port showing up

PTP WDS link Security

Simple Queue Problem from 2.7 to 2.8 Upgrade