MikroTik - Search

blackbox100

Mine does the same, all logs are flooded

blackbox100

agree

blackbox100

why is 6.47beta60 pulled?, I have it installed on my test setup, but now I see that the newest is 6.47beta53?

blackbox100

It works now, the latest beta fixed it

Thanks

blackbox100

it test wan speed to the internet, but Edgar (from MikroTik) has confirmed that the problem exists, when I do the same test on the CRES326 I get full gigabit speed, but not on the CRS354 with the same config

blackbox100

any update on when the ethernet ports will give full gigabit speed?, I need to start using these switches on around the 15 of may? Edgar p wrote "On the CRS354 there seems to be appearing some tx-drops on the 1Gbps Ethernet interface that might affect the TCP download throughput. The counter in...

blackbox100

files sent

blackbox100

you are right the egress rate and ingress rate is enabled on the crs326, I will disable it for the test, and send you both support files after the speedtest is done

there are no ethernet errors on either switches

will send you the files in 10 minutes

sincerely

Carsten

blackbox100

Hi Edpa the basic network is this CRS1036-8G-2S+ (10G internet connection) ---------> CRS317 Core Switch ---------> CRS354 (user switch) All the devices are connected together by DAC Cables. and are linking with 10G I have MacBook connected directly to the CRS354 and by doing a speedtest, I only rea...

blackbox100

Hi All, is anyone experiencing the same issue when testing we only get around 800/800 on gigabit ports it looks like the same issues, as when the crs326 first came out, it couldn't do gigabit either, not before after many beta releases? why on earth does the new crs354 suffer the same problem, is it...

blackbox100

hehe

blackbox100

Hi all

Has anyone heard any news of when we can expect the mUps PRO version, I can see they have discontinued the old version now?

Sincerely

Carsten Larsen

blackbox100

- mUPS pro: 24V/48V battery support, 24V/48V PoE out support, Would be nice if it could send notifications, since after they removed the voltage sensor on the crs326 switches, we don't get notifications from the original mUps. i have around 300 x CRS326/CRS226 switches in my network, and while the C...

blackbox100

Thats weird, because I have tested it on 8 different crs326 all running beta20 and it works perfect, traffic shaping also does work, however the rate settings are still weird. and a crs326 if I want to set a user to 250/250M speed, I have to set ingress rate at 400M and Egress Rate at 250M On a CRS2...

blackbox100

I get around 960mbit up and Down from the crs326 with 6.44beta20 so no speed issues anymore

blackbox100

Cool

blackbox100

I have 10-12 crs317 set up as core switches for running around 280 crs226 and crs326 switches in my isp Network They have been rock solid since the first day we implemented them (when they became available) They are all connected with 10 gbic modules to the crs226/326 and performs very well as core ...

blackbox100

Ok thanks

Will wait for next beta

blackbox100

嗨在6.43.2和前面的6.43.1和6.44 beta9 if you try to reset the Mac-adress on a interface, the switch hangs and becomes unresponsive, after a reboot, the log shows kernel failure in previous boot It works perfectly in 6.43.rc.12 Can anyone verify this fault? Sincerely Carsten Larsen

blackbox100

Hi all first of all, I will say that the dude is correctly setup up with telegram, so if I have a switch that goes down, it will telegram the switch name, and status etc. etc im trying to get the dude to send a telegram message when the syslog sees the text "probably a loop" I occasionally...

blackbox100

And i can confirm that this works

Thanks alot

blackbox100

+1

I would also like to know this

I have 30x crs326 that for now is useless

Sincerely

Carsten Larsen

blackbox100

I had the same issue, and disabled “allow Remote requests” under ip - dns

That fixed it for me

Regards
Carsten Larsen

blackbox100

still problems with ingress rate limit on crs326, when set to 135m ingress I get around 100m on speedtest.net, on the 200 pieces of crs226 ingress rate works, when set to 135m I get 130m on speedtest.net but it has improved since 6.40rc66 where when set to 135m I only got around 30m on speedtest.net...

blackbox100

Figured it out

You have to do it under bridge menu, i can post a few screenshots if you want

blackbox100

Hi all Up until now I have used CRS226 at about 100 locations, but now I cannot get more of them, and have bought a few crs326 hoping that I could use them forward, but they are missing a key feature for me. Its the Qos Shaper menu, where you can set up and download settings pr port, and I can't see...

blackbox100

i have 3 crs326 and they do the same

blackbox100

yes I know I should have checked, thats my fault

有无论如何,我可以有rb1000dude森吗ding sms notifications through another MikroTik that has a USB port with a 3/4G modem connected, for instance my ccr1009?

sincerely

Carsten Larsen

blackbox100

Hi all have just received my RB1100AHx4 Dude Edition only to find out that it doesn't have a USB port Why on earth would mikrotik launch a specific dude edition without the possibility to add a 3G/4G dongle to the USB port I currently run the dude on a ccr1009 and rely on the 3G connection to send m...

blackbox100

Hi all

just got my CRS317, and was trying to add VLAN10 under Switch - VLAN like I do on all my other CRS Switches, but all the ports are shown as Unknown?

any ideas of what Is wrong, see attached screenshot

blackbox100

they say that it will come in future software versions

blackbox100

got this reply Hello, At the moment, CRS3xx Switch Rule table can limit Rate in ingress only. /interface ethernet switch rule add switch=switch1 ports=ether2 rate=200M If setup allows, to achieve Rate limiting in opposite direction we recommend to add Rate limit rules on uplink port with additional ...

blackbox100

Hi all Have a couple of CRS326 (6.40.1) that I bought to replace my CRS226 But the feature I use the most in the CRS226 are the Switch Qos Shaper menu, and that doesn't appear on the CRS326 in winbox 3.11 But today I noticed that if I use a browser to access the web fig menu it has 2 switch menu´s, ...

blackbox100

I hope that because otherwise its useless until the crs328 comes out that hopefully Will have this feature

blackbox100

no not to my knowledge, it works perfectly, I can give a user on ether1 200/200mbit and a user on ether2 125/125mbit if I want, without any increase in CPU usage

blackbox100

Try disable the lcd interface, then the cpu should go down, it does on the crs226

blackbox100

Hi all, have just received four of the new CRS326-24G-2S-RM switche with dualboot RouterOs up until now I have been using around 100 pieces of CRS226-24G-2S+ in my network, but that model has been discontinued now, and replaced by the CRS326 One of the features I use in every of my CRS226 is the Swi...

blackbox100

Hi all, I have a very strange problem Have recently bought 4 sets of S+2332LC10D Wdm modules, from Inter Projekt Poland I have used these modules in many years without problems, and have currently 20 x 10GB Links running with these module sets But the last 4 sets that I have bought, doesn’t work, wh...

blackbox100

me two, I´m eagerly awaiting the crs3228 and the crs317

blackbox100

another question

will future SWos versions give the ability to remote control the switch either from API, telnet or other remote management other than the webgui?

Sincerely

Carsten Larsen

blackbox100

ok, thanks

have a nice weekend

blackbox100

Hi all just received this switch, but can´t seem to find the menu where I can set the bandwidth limitation? The description on MT site, clearly state that it should be possible "It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, a...

blackbox100

CSS has a different OS and does not support LCD. It only has SwOS on it, so there are no optional routing capabilities like in the CRS.

I only need it for switching, and dont ned the lcd, what about 48 ports?

blackbox100

I also have about 10 of these CRS125-24G-1S-RM and they are configured exactly as the crs226, only as switch, and they use sround 8-9% cpu, thats why i think the 226 woyld benefit from the same processor as the crs125 The new CRS3xx series will have a much more poweful 800MHz Marvell CPU, even bett...

blackbox100

...crs226, only as switch, and they use sround 8-9% cpu In my tests, these percents are for lcd graphs. If you disable LCD - you'll immediately recover that extra CPU cycles. Strange to know that CPU is so weak (or maybe code is so bad) that even cycled display simple statistics results in such a b...

blackbox100

不,对不起,我只使用开关,没有路由傅nctions enabled, we have tried to get an explanation from you many times, anf have sent config files, but mikrotik never replied us All the routing are done in our 4 CCR1036-8G-2S+EM I also have about 10 of these CRS125-24G-1S-RM and they are configu...

blackbox100

I'm so excited about the coming CRS326-24G-2S+! Would you mind to share us some specs? I hope for a stronger CPU and an all POE version. [/list] me too, I was hoping for at new CRS226 with at least a 600mhz processor, because the 400Mhz processor is using 50% cpu now, and sometimes it hits 100% and...

blackbox100

is it possible that you have used system backup tool to copy config from one to another, because, when you do that it also clones the Mac adresses, under the ethernet interface, just hit the "reset Mac-adress" button and that should clear it

Search found 48 matches