我不能用浏览器连接到cAP的webfig接口，也不能通过它的IP连接到Winbox。它只能在带有MAC地址的Winbox中工作。
不过它会响应ping信号。当我ping它时，ARP正在解析正确的MAC，所以我猜这不是地址冲突。
我遗漏了什么?
这是的输出/export hide-sensitive compact：
代码:选择所有
(admin@雷竞技网站MikroTik帽XL ac) > /出口隐藏敏感紧凑# 1月/ 16/1970 20:09:44 RouterOS 6.49.7 id = BBL3-MURl雷竞技9 # # #软件雷电竞app下载官方版苹果模型= RBcAPGi-5acD2nD #序列号= HDK08 * * * * * * /接口桥添加admin-mac = 48: A9:8A: 25:56:85 auto-mac =无可奉告= defconf name =桥/接口列表添加评论= defconf名称= WAN添加评论= defconf name =局域网/无线安全性配置文件设置界面(找到默认= yes) supplicant-identity = MikroTik添加身份验证类型= wpa2-pskgroup-ciphers = tkip aes-ccm模式= dynamic-keys名称= auth supplicant-identity = " " \ unicast-ciphers = tkip aes-ccm /接口的无线设置[找到缺省名称= wlan1]乐队= 2 ghz-b / g / n沟道宽度= 20/40mhz-XX国家=以色列禁用= =在室内安装\频率= 2442 =没有距离室内模式= ap-bridge安全概要= auth名称=“净2.4”无线协议= \ 802.11[找到缺省名称= wlan2]乐队= 5 ghz-a / n /交流通道宽度= 20/40/80mhz-XXXX国家=以色列禁用= =室内\没有距离安装=indoor mode=ap-bridge security-profile=auth ssid="Net 5"无线协议=802.11 /ip pool add name=dhcp ranges=192.168.88.10-192.168.88.254 /ip dhcp-server add address-pool=dhcp interface=bridge name=defconf /queue interface set wlan1 queue=only-硬件-queue set wlan2 queue雷竞技官网网站下载=only-硬件-queue /interface bridge port add bridge=bridge comment=defconf interface=ether2 add bridge=bridge comment=defconf interface=wlan1 add bridge=bridge comment=defconf interface=wlan2 add bridge=bridge comment=defconf interface=wlan2 add bridge=bridge comment=defconf interface=wlan2 add bridge=bridge comment=defconf interface=wlan2 add bridge=bridge comment=defconf interface=wlan2 add bridge=bridge comment=defconf interface=wlan2 add bridge=bridge comment=defconf interface=wlan2 add bridge=bridge comment=defconf interface=wlan2桥=网桥接口= ether1 / ip邻居discovery-settings设置discover-interface-list =局域网/接口列表成员添加评论= = ether1 defconf接口列表= = ether2列表=局域网LAN添加界面添加界面= wlan2列表= = wlan1列表=局域网LAN添加界面添加禁用= yes / ip地址添加地址= 192.168.88.2/24评论= =桥接网络= 192.168.88.0 defconf接口/ ip dhcp客户端添加评论= defconf界面=桥/ ip dhcp服务器网络添加地址= = defconf 192.168.88.0/24评论DNS -server=192.168.88.1网关=192.168.88.1 /ip DNS set allow-remote-requests=yes /ip DNS静态添加地址=192.168.88.2 comment=defconf name=router。lan /ip防火墙过滤器add action=accept chain=input comment="defconf: accept established,related,untracked"连接状态=\ established,related,untracked"添加动作=drop chain=input comment="defconf: drop invalid"连接状态=invalid添加动作=accept chain=input comment="defconf: accept ICMP"协议= ICMP添加动作=accept chain=input comment="defconf: accept to local loopback (for CAPsMAN)" st-address=127.0.0.1添加动作=drop chain=input comment="defconf: accept to local loopback (for CAPsMAN)"删除所有非来自局域网的“in-interface-list=!”LAN add action=accept chain=forward comment="defconf: accept in ipsec policy" ipsec add action=accept chain=forward comment="defconf: accept out ipsec policy" ipsec add action=accept chain=forward comment="defconf: accept out ipsec policy" ipsec add action=fasttrack-connection chain=forward comment="defconf: fasttrack" connection-state= " established,related " add action=accept chain=forward comment="defconf: accept established,related,untracked " connection-state=\ established,related,untracked " add action=drop chain=forward comment="defconf: accept established,related,untracked "drop invalid" connection-state=invalid add action=drop chain=forward comment="defconf: drop all from WAN not stnated " connection-nat-state=!dstnat \ connection-state=new in-interface-list=WAN /ip firewall nat add action=masquerade chain=srcnat comment="defconf:masquerade" ipsec-policy=out,none - out-interface-list=WAN /system identity set name雷竞技网站="MikroTik cAP XL ac" /systeios版雷竞技官网入口m routerboard mode-button set enabled=yes on-event=dark-mode /system script add comment=defconf not -require-permissions=no name=dark-mode owner=*sys policy=\ ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="\r\ \n:if ([system led settings get all-leds-off] =\ "never\") do={\r\ \n /system led settings set all-leds-off=immediate \r\ \n} else={\r\ \n /system led settings set all-leds-off=immediate \r\ \n leds settings set all-leds-off=never \r\ \n }\r\ \n " /tool mac-server set allowed-interface-list=LAN /tool mac-server mac-winbox set allowed-interface-list=LAN
