情况:德国AVM“fritzbox”作为家里的一个小电话总机。在该公司，一个“统一”(前身为“西门子”)电话交换机提供SIP协议。我希望FritzBox作为公司统一的SIP客户端。问题是，FritzBox在默认情况下通过其internet连接路由所有SIP电话，而不管您在家庭网配置中使用哪种IP路由。在web gui中，你不能配置其他任何东西。您必须备份配置、编辑它并恢复它。对于这一点，fb工具非常有用:https://www.mengelke.de/Projekte/FritzBoxTools
要求:你的家庭办公室和公司之间有一个工作的VPN连接，你可以通过udp端口5060到达公司的电话总机。
例如，统一将有IP-Number“192.168.100.2”，你的mikrotik“192.168.178.254”和F雷竞技网站ritzBox“192.168.178.1”。这个电话的直接电话号码是“10”。
*首先在FritzBox主页上通过MK路由器192.168.178.254建立到统一IP网192.168.100.0/24的路由
*在FritzBox电话为您的公司号码做一个SIP配置，注册商是统一IP: 192.168.100.2见点2在:
https://en.avm.de/service/fritzbox/frit…FRITZ-Box /
但这是行不通的。
*备份您的FritzBox配置与密码
编辑你保存的文件。转到“voipcfg”部分和公司SIP的ua。基本的选择是:
- Localip = 192.168.178.1 #(默认值:"0.0.0.0")
- Route_always_over_internet = no;#(默认:“是的”)
- Sipiface = sipiface_homenet;#(默认值:"sipiface_automatic" -可能的选项有:sipiface_automatic, sipiface_internet, sipiface_voip, sipiface_mta, sipiface_homenet, sipiface_vpn, sipiface_tunnel)
代码:选择所有
fb_tools % ./fb_tools.php myfritz konfig ImPort-CalcSum FRITZ. php盒子\ Fon\ WLAN\<您编辑的备份>。导出<备份密码>
代码:选择所有
Ua5 {enabled = yes;用户名= "$$$$VQ....";Authname = "";passwd = "$$$$WZ…";注册商= "192.168.100.2";TTL = 30m;Sipping_enabled = no;Sipping_interval = 280s;Name = "10";Providername =" provider_id=other_192.168.100.2;parentprovider_id=;numberprefix=;usersprefix=;usersuffix="; ims_client = no; with_displayname = no; read_from_displayname = yes; dtmfcfg = dtmfcfg_automatic; rtpevent_keep_packetrate = no; register_failwait = 0w; register_failwaitmax = 30m; stunserver = ""; stunserverport = 3478; use_internat_calling_numb = no; is_nat_aware = no; localip = 192.168.178.1; protocolprefer = protocolprefer_ipv4only; ignore_received_header = no; always_clir = no; clirtype = clir_displayname; reject_anonymous_call_with_433 = no; colptype = colp_none; clipnstype = clipns_off; vad_enabled = no; only_one_dialog = no; presence_supported = no; mwi_supported = yes; mwi_inmemoria = no; ccbs_supported = no; reg_support = regsupport_auto; packetization = packetization_fixed; tx_packetsize_in_ms = 30; xrtp_periodic = 0; reject_refer = yes; sip_instance = no; no_register_fetch = yes; do_not_register = no; only_call_from_registrar = no; invite_without_register_allowed = no; outboundproxy = ""; outboundproxy_without_route_header = no; factory_3pty_uri = ""; no_hold_speech = no; dditype = ddi_none; ddireception = ""; webui_trunk_id = "multisip:80118115-...."; alias_head_number = ""; cfxsignaling = cfx_standard; backup_wanted = no; use_session_timer = no; use_rport = yes; add_rtpmap_for_all_codecs = no; answer_only_one_codec = no; without_annexb_no = no; srtp_supported = no; crypto_avp_mode = crypto_mode_avp_only; use_488_for_no_t38 = no; g726_via_rfc3551 = no; no_g726_32_offer_with_pt2 = no; g726_fixed_ptime30 = no; dtmf_inband_on_g711g722 = no; enable_3xx = yes; t38_reinvite_from_remote = no; use_t38version0 = no; rtcp_xr_media_attribute = no; ptime_a_attribute = yes; tones_and_announcements_for_service = no; read_p_asserted_identity_header = no; route_always_over_internet = no; sipiface = sipiface_homenet; altc_attribute_rfc6947 = no; send_extended_sip_client_info = no; gui_readonly = no; convertstate = 0; snmp_instance = 0; loopback_client_username_fos = ""; loopback_client_username_pass_through = ""; directloopback_client_username = ""; }