Please post your configuration. Without that, we're just guessing. To export and paste your configuration (and I'm assuming you are using WebFig or Winbox), open a terminal window, and type (without the quotes) "/export hide-sensitive file=any-filename-you-wish". Then open the files section and right click on the filename you created and select download in order to download the file to your computer. It will be a text file with whatever name you saved to with an extension of .rsc. Suggest you then open the .rsc file in your favorite text editor and redact any sensitive information. Then in your message here, click the code display icon in the toolbar above the text entry (the code display icon is the 7th one from the left and looks like a square with a blob in the middle). Then paste the text from the file in between the two code words in brackets.
# 8月/ 23/2022 20:57:43 Roul雷竞技terOS 6.48.6 # software id = # # # /interface bridge add name=bridge1 /interface wireless security-profiles set [ find default=yes ] supplicant-identity=MikroTik /interface bridge port add bridge=bridge1 interface=ether1 add bridge=bridge1 interface=ether2 /interface bridge settings set use-ip-firewall=yes /ip address add address=5*******/24 interface=ether1 network=5******* /ip dhcp-client # DHCP client can not run on slave interface! add disabled=no interface=ether1 /ip dns set servers=8.8.8.8 /ip firewall address-list add address=1******** list=fivem /ip firewall filter add action=add-src-to-address-list address-list=fivemtemiz \ address-list-timeout=3m chain=forward content=CitizenFX dst-address-list=\ fivem dst-port=30120 protocol=tcp add action=add-src-to-address-list address-list=fivemtemiz \ address-list-timeout=3m chain=forward dst-address-list=fivem dst-limit=\ 2,2,src-and-dst-addresses/1m40s src-address-list=fivemtemiz /ip firewall raw add action=notrack chain=prerouting comment=No-Track add action=drop chain=prerouting comment=Fivem-Koruma dst-address-list=fivem \ dst-port=30120 protocol=udp src-address-list=!fivemtemiz add action=accept chain=prerouting comment=Fivem-Temiz dst-address-list=fivem \ dst-limit=9999,9999,src-and-dst-addresses/1m40s src-address-list=\ fivemtemiz add action=add-src-to-address-list address-list=ddos address-list-timeout=50s \ chain=prerouting comment=Fivem-Temiz dst-address-list=fivem \ src-address-list=fivemtemiz add action=accept chain=prerouting comment=Genel-UDP dst-address-list=fivem \ dst-limit=500,500,dst-address/1m40s protocol=udp src-address=8.8.8.8 \ src-port=53 add action=accept chain=prerouting comment=Genel-UDP dst-address-list=fivem \ dst-limit=500,500,dst-address/1m40s protocol=udp add action=drop chain=prerouting comment=Genel-UDP dst-address-list=fivem \ protocol=udp add action=accept chain=prerouting comment=TCP-SYN-52 dst-address-list=fivem \ dst-limit=50,50,dst-address/1m40s packet-size=52 protocol=tcp tcp-flags=\ syn add action=accept chain=prerouting comment=TCP-SYN-ALL dst-address-list=fivem \ dst-limit=50,50,dst-address/1m40s protocol=tcp tcp-flags=syn add action=drop chain=prerouting comment=TCP-SYN-DROP dst-address-list=fivem \ protocol=tcp tcp-flags=syn add action=accept chain=prerouting comment=TCP-RST dst-address-list=fivem \ dst-limit=5,5,dst-address/1m40s protocol=tcp tcp-flags=rst add action=drop chain=prerouting comment=TCP-RST dst-address-list=fivem \ protocol=tcp tcp-flags=rst add action=accept chain=prerouting comment=TCP-FIN dst-address-list=fivem \ dst-limit=50,50,dst-address/1m40s protocol=tcp tcp-flags=fin add action=drop chain=prerouting comment=TCP-FIN dst-address-list=fivem \ protocol=tcp tcp-flags=fin add action=drop chain=prerouting comment=ICMP-DROP dst-address-list=fivem \ protocol=icmp /ip route add distance=1 gateway=57.******* /system identity set name=RouterOS