Summary
Sub-menu:/system leds
l雷竞技th RouterOS允许配置每个领导的活动e way that the user wishes. It is possible to configure the LEDs to display wireless strength, blink the LEDs on interface traffic activity, and many other options.
For example, default led configuration on Groove
[admin@MikroTik] /system leds> print Flags: X - disabled # TYPE INTERFACE LEDS 0 wireless-signal-strength led1 led2 led3 led4 led5 1 interface-activity ether1 user-led
RB Groove uses five LEDs for wireless strength and one for ethernet activity monitoring.
Property Description
| Property | Description |
|---|---|
| disabled(yes | no; Default:no) | Whether an item is disabled |
| interface(string; Default: ) | Name of the interface which will be used for led status. Applicable only iftypeis interface specific. |
| modem-signal-treshold(integer [-113..-51]; Default: ) | Applicable if a type ismodem-signal |
| leds(list of leds; Default: ) | List of led names used for a status report. For example, wireless signal strength will require more than one led. |
| type(align-down | align-left | align-right | align-up | ap-cap | fan-fault | flash-access | interface-activity | interface-receive | interface-speed | interface-speed-1G | interface-speed-25G | interface-status | interface-transmit | modem-signal | modem-technology | off | on | poe-fault | poe-out | wireless-signal-strength | wireless-status; Default: ) | Type of the status:
|
LED Settings
Global settings are stored in LEDs Setting menu.
Sub-menu:/system leds setting
| Property | Description |
|---|---|
| all-leds-off(after-1h | after-1min | immediate | never; Default:never) | Whether and when all LEDs of a router can be turned off |
The listed devices support turning off their LEDs (LED dark mode), however, some LEDs still cannot be turned off due to the device design factors.
Indoor devices
| ios版雷竞技官网入口 | LED description |
|---|---|
| CRS305-1G-4S+ | Turns off all LEDs except Ethernet LED and Power LED |
| CRS309-1G-8S+ | Turns off all LEDs except Ethernet LEDs |
| RB5009UG+S+IN | Turns off all LEDs |
| RB760iGS (hEX S) | Turns off Power LED and SFP LED |
| RB924i-2nD-BT5&BG77; RB924iR-2nD-BT5&BG77 (KNOT series) | Turns off all LEDs |
| RB951Ui-2HnD | Turns off all LEDs except Power LED |
| RB951Ui-2nD (hAP); RB952Ui-5ac2nD (hAP ac lite); RB952Ui-5ac2nD-TC (hAP ac lite TC) | Turns off all LEDs except Power LED |
| RB962UiGS-5HacT2HnT (hAP ac) | Turns off all LEDs except Port5 PoE LED |
| RBcAP2n; RBcAP2nD (cAP) | Turns off all LEDs |
| RBcAPGi-5acD2nD (cAP ac); RBcAPGi-5acD2nD-XL (cAP XL ac) |
Turns off all LEDs |
| RBD25G/RB25GR-5HPacQD2HPnD (Audience) | Turns off all LEDs except Ethernet LEDs |
| RBD52G-5HacD2HnD-TC (hAP ac^2) | Turns off all LEDs |
| RBD53iG-5HacD2HnD (hAP ac^3) | Turns off all LEDs |
| RBD53G-5HacD2HnD-TC (Chateau series) | Turns off all LEDs |
| RBwsAP5Hac2nD (wsAP ac lite) | Turns off all LEDs |
| C52iG-5HaxD2HaxD-TC (hAP ax^2) | Turns off all LEDs except Ethernet LEDs |
| C53UiG+5HPaxD2HPaxD (hAP ax^3) |
Turns off all LEDs except Ethernet LEDs |
| S53UG+5HaxD2HaxD-TC (Chateau ax series) | Turns off all LEDs |
Wireless Systems
| ios版雷竞技官网入口 | LED description |
|---|---|
| CubeG-5ac60ay (Cube 60Pro ac); CubeG-5ac60ay-SA (CubeSA 60Pro ac) | Turns off all LEDs |
| CubeG-5ac60ad (Cube 60G ac) | Turns off all LEDs |
| RB912R-2nD-LTm (ltAP mini / ltAP mini LTE kit) | Turns off all LEDs |
| RB912UAG-6HPnD (BaseBox 6) | Turns off all LEDs |
| RBD23UGS-5HPacD2HnD (NetMetal ac^2) | Turns off all LEDs |
| RBLDF-2nD (LDF 2); RBLDF-5nD (LDF 5); RBLHGR | Turns off all LEDs |
| RBLDFG-5acD (LDF 5 ac) | Turns off all LEDs except Ethernet LED |
| RBLHG2nD (LHG 2); RBLHG2nD-XL (LHG XL 2) | Turns off all LEDs |
| RBLHG5nD (LHG 5); RBLHG5HPnD (LHG HP5); RBLHG5HPnD-XL (LHG XL HP5) | Turns off all LEDs |
| RBLHGG-5acD (LHG 5 ac); RBLHGG-5acD-XL (LHG XL 5 ac); RBLHGG-5HPacD2HPnD (LHG XL 52 ac); RBSXTsqG-5acD (SXTsq 5 ac) | Turns off all LEDs except Ethernet LED |
| RBLHGG-60ad (Wireless Wire Dish) | Turns off all LEDs |
| LHGGM&EG18-EA (LHG LTE18 kit) | Turns off all LEDs |
| RBLtAP-2HnD (LtAP) | Turns off all LEDs except Ethernet LEDs |
| RBSXTsq-60ad (SXTsq Lite60); RBCube-60ad (Cube Lite60) | Turns off all LEDs |
| RBwAPG-60ad (Wireless Wire) | Turns off all LEDs |
| RBwAPGR-5HacD2HnD (wAP ac) | Turns off all LEDs except Ethernet LED |
Examples
Basic example
LED control via CLI commands for scripting purposes:
#add led entry with specific type "on" or "off" to leds menu /system leds add leds=led1 type=off #to control led /system leds set [find where leds="led1"] type=on or /system leds set [find where leds="led1"] type=off
Enable the User ACT LED to show current CAP status on an RB951
/system leds add leds=user-led type=ap-cap
Modem Signal Strength example
The whole modem-signal strength range is [-113..-51] and the modem-signal-threshold increases the weakest signal limit to -91 so the signal range for LED indication is [-91..-51]. That range is divided into equal parts depending on number of LEDs configured for modem-signal LED trigger. The first LED turns on when signal is above -91 and the last LED turns on when signal reaches -51.
/system leds add interface=lte1 leds=led1,led2,led3,led4,led5 modem-signal-treshold=-91 type=modem-signal
Modem Access Technology example
These LED trigger examples turn on LEDs in order of modem technology generation: GSM; 3G; LTE.
- 1 LED: led1 turns on when LTE is active;
/system leds add interface=lte1 leds=led1 modem-type=modem-technology
- 2 LEDs: led1 - 3G; led2 - LTE;
/system leds add interface=lte1 leds=led1,led2 modem-type=modem-technology
- 3 LEDs: led1 - GSM; led2 - 3G; led3 - LTE
/system leds add interface=lte1 leds=led1,led2,led3 modem-type=modem-technology
Overview
Content Tools